Adaptec RAID 3085 User Manual page 50

4
Select a RAID level.
The most common RAID levels are listed first; advanced RAID levels are available by
clicking Advanced settings.
Note:
To build a RAID Volume, see
more information about RAID levels.
5
Click Next.
6
In the Physical Devices panel, select the disk drives you want to use in the logical drive.
Note:
Adaptec recommends that you not combine SAS and SATA disk drives within the same
logical drive. Adaptec Storage Manager generates a warning if you try to create a logical drive
using a combination of SAS and SATA disk drives.
Adaptec Storage Manager prompts you to select the correct number of disk drives. For
example, this figure illustrates disk drives installed in a system.
Getting Started Step 4: Building Your Storage Space
page 54. See Selecting the Best RAID Level on page 158
50
●
for
Create Global Hot
Spare button