Disabling Email Notifications; Broadcasting Event Alerts To Users - Adaptec RAID 3085 User Manual

Disabling Email Notifications

Email notifications are enabled by default, but can be disabled, if required.
Note:
If you disable email notifications, events will be generated but email notices won't be
broadcast.
To disable email notifications:
1
Open the Email Notification Manager. (See
2
In the menu bar, click Actions, then click Disable Email Notifications.
Email notifications are disabled. The Email Notifications tab (shown at
right) shows the red 'disabled' icon.
Re-enabling Email Notifications
To re-enable email notifications, repeat steps
Enable Notifications during

Broadcasting Event Alerts to Users

You can set the Adaptec Storage Manager Agent to send event alerts about a specific system to
all users who are logged into your storage space. You might want to do this if your storage
space isn't managed by a dedicated person, or if that particular system is off-site or not
connected to a monitor. Event alerts signal everyone working on the storage space that a
system requires technical assistance.
When you set Adaptec Storage Manager to broadcast event alerts, all logged-in users receive
messages about all types of events. In Windows, these alerts appear as pop-up messages; in all
other operating systems, these alerts appear as console messages.
When enabled, event alerts occur independent of event notifications (see
notifications (see
To enable event alerts:
1
On the tool bar, click the Configure button, select the system you want, then click General
Settings.
The Adaptec Storage Manager Agent General Settings window opens for that system. (See
the figure on
Step 2.
page 100).
page 64.)
Chapter 8: Monitoring Your Storage Space
page 100.)
1 and 2 in Disabling Email
106
●
Notifications, selecting
page 94) and email