Adaptec DuraStor 6200SR User Manual page 8

Status OK Menu
Main Menu
Controller Menu
Hardware Menu
Figure 1-2. Menu Tree Part 1
Controller Menu
Controller 1
System Menu
Controller 2
Hardware Menu
Activity
Firmware
Power
Fans
Mode
Activity
Controller 1
CH[2]
Displays an activity
monitor for each
Controller 2
CH[1] channel bus to
identify high activity.
Firmware
Displays firmware
FIrmware Version:
revision information.
Power
Displays status
Power Supply1
of each power
Power Supply2
supply.
Fans
Fan1 Displays status
Fan2 of each cooling
Fan3 fan.
Mode
Serial Port: OCP Mode
Serial Port: EXT Mode
Introduction
Sets the OCP input
mode and must be set
in conjunction with the
Ext/Int switch setting.
LCD mode (Int) sets the
mode to the OCP and
Standard mode (Ext)
sets the mode to terminal.
1-3