Viewing The Mode Screen; Using The Utilities Menu; Displaying Hardware Information; Displaying Overall Statistics - Adaptec DuraStor 6200SR User Manual

Viewing the Mode Screen

The Mode screen sets the input mode choice from the OCP to the
terminal keyboard (VT-100). This setting works in conjunction with
the Ext/Int switch located on the I/O connectivity panel of the
DuraStor 6200SR RAID appliance. This OCP setting and the I/O
connectivity panel switch setting must match, otherwise neither
the OCP buttons nor the VT-100 keyboard will work.
To view the Mode screen
1 Press Menu and choose the desired hardware, then press Enter.
2 Choose Mode, then press Enter.
3 Choose the mode, then press Enter. (Be sure to set the Ext/Int
switch on the I/O connectivity panel to match.)
4 Press Esc to return to previous menu.

Using the Utilities Menu

Displaying Hardware Information

1 Press Menu, choose Controller Menu, then press Enter.
2 Choose the desired controller, then press Enter.
3 Choose Utilities Menu, then press Enter.
4 Choose Hardware Information, then press Enter.
↑ ↓
5 Use and
6 Press Esc to return to the Utilities Menu.

Displaying Overall Statistics

Aggregate statistics for all partition LUNs can be displayed in two
formats:
List of general statistics. (Similar statistics are also available for
I
individual partition LUNs. For more information, see
Partition Statistics on page
– I/O operations per second (IOPS)
– Bandwidth (in millions of bytes per second)
– Number of read operations
to cycle through the hardware information.
2-22.)
Monitoring System Status
Viewing
3-4