Adaptec DuraStor 6200SR User Manual page 24

Checking the Progress of the Array Verification
You can check the progress of the array verification at any time.
There are two ways to do this:
See Viewing Verification Status on page
I
Select Array Menu from the System Menu.
I
The status of the verification appears in the list of arrays.
Viewing Verification Status
You can view the status of the verification process while it is
running.
1 Press Menu, choose Controller Menu, then press Enter.
2 Choose the desired controller
3 Choose Array Menu, then press Enter.
4 Choose the array you want, then press Enter.
5 Choose Verify Function, then press Enter.
6 Choose View Verify Status, then press Enter.
7 Press Esc to return to the Verify menu.
Stopping the Verification
You can stop the verification process. Normally, you should let the
verification finish, although stopping it does not cause any damage
to your data. You may wish to stop the verification if you want to
improve performance of the controller for another application.
1 Press Menu, choose Controller Menu, then press Enter.
2 Choose the desired controller
3 Choose Array Menu, then press Enter.
4 Choose the array you want, then press Enter.
5 Choose Verify Function, then press Enter.
6 Choose Abort Verify, then press Enter.
The system asks if you want to stop the verification process.
7 Choose Y, then press Enter.
Creating and Managing Arrays and Partitions
2-14, or
,
then press Enter.
,
then press Enter.
2-14