Managing Arrays; Adding A Partition - Adaptec DuraStor 6200SR User Manual

Managing Arrays

Using the OCP, you manage your arrays in a variety of ways. You
can
Add a partition (see
I
View array and disk drive information (see
I
Stop the initialization process (see
I
Verify an array (see
I
Reconstruct an array (see
I
Expand array capacity (see
I
Change the array name (see
I
Change array ownership (see
I
Trust an array (see
I
Delete an array (see
I

Adding a Partition

If you created a multiple-partition array, you must create at least
one partition before you can use it. You can continue to create
partitions until you use all of the available free space.
1 Press Menu, choose Controller Menu, then press Enter.
2 Choose the desired controller
3 Choose All Partition, then press Enter.
All existing arrays display.
4 Choose the array you want
5 Choose Add a Partition, then press Enter.
All free partitions display.
6 Choose the partition you want, then press Enter.
Creating and Managing Arrays and Partitions
page 2-9).
page 2-13).
page 2-15).
page 2-15).
page 2-17).
page
page 2-18).
page 2-20).
,
then press Enter.
,
then press Enter.
page 2-10).
page 2-12).
2-18).
2-9