Setting Host Lun Ids - Adaptec DuraStor 6200SR User Manual

Setting Host LUN IDs

1 Press Menu, choose Controller Menu, then press Enter.
2 Choose the desired controller
3 Choose Config Menu, then press Enter.
4 Choose Host Config, then press Enter.
5 Press Enter.
6 Change the ID, then press Enter.
Choose any number between 0 and 15.
7 Press Enter to accept the default Controller LUN.
8 Choose Y, then press Enter.
9 Restart the controller for the changes to take effect. See
the Controller on page 5-2
Creating and Managing Arrays and Partitions
,
then press Enter.
for instructions.
Rebooting
2-26