Displaying Disk Drive Information - Adaptec DuraStor 6200SR User Manual

Displaying Disk Drive Information

You can display two types of information about disk drives:
A list of all disk drives connected to the controller. See
I
The status of all disk drives in an array. See
I
Displaying All Disk Drives
You can display the following information for all disk drives
connected to the controller:
Channel number
I
SCSI target ID number
I
Size
I
Manufacturer
I
Model number
I
Drive firmware revision
I
If any of the disk drives are members of an array, the following
information may also display:
Utility running—Expand, Verify, and so on.
I
Array number—The array's sequential position in the
I
controller's array list.
Member number—The disk drive's sequential position in the
I
array.
Disk drives that are not members of any array are listed as
Available.
Disk drives that contain leftover metadata from a previous array
are listed as Leftover, which happens if disk drives are pulled and
reinserted. To clear leftover metadata, use the Clear Metadata
Function. See Clearing Metadata from a Disk Drive on page 6-3
Managing Disk Drives and Enclosures
page
page 6-2.
2-10.
6-2