Restoring Default Settings - Adaptec DuraStor 6200SR User Manual

Caution: Do not stay in Hot Swap Pause mode for too long
!
or an OS time-out may occur. The pause limit before time-
out varies according to the OS. For example, in Windows
NT, the default time limit during I/O activity is 10
seconds.
5 When you have replaced the drive, resume SCSI bus activity by
pressing Esc.

Restoring Default Settings

You can restore all of the controller's default settings and change
those that are critical to your configuration. You may want to do
this if the controller is not working properly and you cannot
determine why.
1 Press Menu, choose Controller Menu, then press Enter.
2 Choose the desired controller, then press Enter.
3 Choose Config Menu, then press Enter.
4 Choose Restore Defaults, then press Enter.
The system asks you to confirm the change.
5 Choose Y, then press Enter.
The system confirms that the changes are made.
6 Press Esc to return to the previous menu.
Configuring the RAID Controller
5-16