Input 4 (Dial Abort Option ) - Pyronix Vocaliser Installation Manual

Dial
"THREE" will be heard.
Enter the trigger type:
Dial
o
Dial
o
Dial
o
Dial
o
"SAVED" will be heard.
"PLEASE ENTER COMMAND" will be heard
returning you to the engineer menu.
Dial
"FOUR" will be heard.
Enter the trigger type:
Dial
o
Dial
o
Dial
o
Dial
o
"SAVED" will be heard.
"PLEASE ENTER COMMAND" will be heard
returning you to the engineer menu.
6 . 2 I n p u t 4 ( D i a l A b o r t O p t i o n )
Input 4 on the Vocaliser may be programmed to be an input which will abort the dial sequence.
If this is enabled, the Vocaliser will abort the dialling sequence if there is a change in the state
of Input 4 (a voltage change).
Dial
A "BEEP" will be heard
Enter either of the following:
o Dial
"INPUT FOR ALARM SAVED" will be heard.
o
or
o Dial
o "INPUT FOR ABORT SAVED" will be heard.
"PLEASE ENTER COMMAND" will then be heard
returning you to the engineer menu.
RINS119-5
to change input 3.
for Negative Applied (default) or
for Positive Removed or
for Negative Removed or
for Positive Applied
to change input 4.
for Negative Applied (default) or
for Positive Removed or
for Negative Removed or
for Positive Applied
to program input 4.
to set the input as an alarm type.
to set the input as an abort type
VOCALISER INSTALLATION MANUAL
Page: 13