1. Manuals
  2. Brands
  3. Tree Frogs Manuals
  4. Play Sets & Playground Equipment
  5. Mega Deck Fort
  6. Install manual

Tree Frogs Mega Deck Fort Install Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Tape Measure
Phillips Screw Driver
Claw Hammeror Rubber Mallet
9/16" Deep Well Socket
Phillips Head Screw Bits
Please familiarize yourself with the install manual, parts/components and general construction process of your new swing set before
getting started. Approximate assembly time: 6 to 8 hours. 6 foot unobstructed safety perimeter around swing set recommended.
Houston, tX 77041 • www.treefrogsswingsets.com • © 2013 kiD structures inc.
6.4 Mega Deck Fort
Install Manual
Tools Needed for Assembly
24" Level
3/8" Cordless Drill or Electric Drill
Pliers or Vise Grips
3/4" Deep Well Socket
An Adult with two Adult Helpers
Version 6.14
Angle Square
3/8" Drive Ratchet or Electric Impact Gun
7/16" Deep Well Socket
1/8", 1/4", and 9/16" Drill Bits

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mega Deck Fort and is the answer not in the manual?

Questions and answers

Related Manuals for Tree Frogs Mega Deck Fort

Summary of Contents for Tree Frogs Mega Deck Fort

  • Page 1 6.4 Mega Deck Fort Install Manual Version 6.14 Tools Needed for Assembly Tape Measure 24” Level Angle Square Phillips Screw Driver 3/8” Cordless Drill or Electric Drill 3/8” Drive Ratchet or Electric Impact Gun Claw Hammeror Rubber Mallet Pliers or Vise Grips 7/16”...
  • Page 2 ● Be sure that the sealant you select is non-toxic and child safe. Your local tree frogs wooden swing set factory dealer may offer a complete power wash and reseal and maintenance program.

  • Page 3: Important - Please Read

    Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the Tree Frogs Swing Set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will enjoy your play system for many years to come.
  • Page 4 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ●...
  • Page 5 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS the u.s. consumer Product safety commission (cPsc) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.

  • Page 6: Universal Deck

    Megadeck Fort Universal Bundle 1 Item No. Part Number Part Description QTY. mB1-1 17-4-00157 UNIVERSAL FORT MAINBEAM mB1-2 16-4-00285 UNIVERSAL FORT TOP JOIST SB mB1-3 16-4-00216 (L) gusset BrAcket mB1-4 16-4-00217 (r) gusset BrAcket mB1-5 16-4-00214 UNI. PC CORNER POST/ UNI. FORT UPRIGHT mB1-6 16-4-00290 UNI.
  • Page 7 10-4-00266 uni. smALL rw BoArD BLAnk rw-7 16-4-00215 UNIVERSAL ROPE rw-8 16--4-00218 uniVersAL entrAPment BLock Mega Deck Fort Wood Roof Bundle wr-1 13-4-00078 UNIVERSAL WOOD ROOF SUPPORT wr-2 64-7-00208 FORT WOOD ROOF FAN wr-3 64-7-00209 FORT WOOD ROOF PANEL...

  • Page 8: Part Description

    6.4 Mega Deck Fort Box A. (Multi- Color) Item No. Part Number Part Description QTY. BXA-1 37-1-00018 19” sHiP’s wHeeL-YeLLow BXA-2 37-1-00021 TELESCOPE BXA-3 60-1-00006 20” trAPeze BAr w/ 43” cHAin- YeLLow 6.4 Fort Box Rockwall (Multi- Color) rwB-1 36-1-00023...
  • Page 9 40-1-00109 1/2” x 9” HEx BOLT mfH-25 40-1-00115 3/8” X 5 1/2” cArriAge BoLt mfH-26 41-1-00025 3/8” BOLT CUP Mega Deck Fort 6.4 Hardware Bag Item No. Part Number Part Description QTY. 6mH-1 40-1-00002 1/2” ACORN NUT PLATED 6mH-2 40-1-00028 1/2”...
  • Page 10 6.4 Fort Rockwall Hardware Bag Item No. Part Number Part Description QTY. rwH-1 40-1-00067 1/4” x 1 1/2” PAN PHILLIPS M/S rwH-2 40-1-00077 1/4” X 7/16” 4 Prong t-nut rwH-3 40-1-00081 1/4” USS FLATWASHER rwH-4 40-1-00061 3/8” X 5” HeX LAg screw rwH-5 40-1-00082 3/8”...
  • Page 11 Megadeck Fort Bundle 1 of 2 MB1-1 MB1-2 MB1-3 MB1-4 17-4-00157 16-4-00285 16-4-00216 16-4-00217 Universal Fort Mainbeam Uni. Fort Top Joist SB (L) Gusset Bracket (R) Gusset Bracket QTY. 4 QTY. 1 QTY. 3 QTY. 3 MB1-5 MB1-6 MB1-7 16-4-00214 16-4-00290 16-4-00283 Universal Fort Upright...
  • Page 12 Megadeck Fort Bundle 2 of 2 Cont. MB2-5 MB2-4 MB2-6 13-4-00086 12-4-00140 12-4-00141 Fort Playhouse Panel Facia Universal Filler Universal Rail Bottom QTY. 1 QTY. 3 QTY. 2 6.4 Megadeck Fort Bundle B. MBA-1 MBA-2 16-4-00292 16-4-00314 128” Fort Corner Post 128”...
  • Page 13 6.4 Megadeck Fort Bundle B. Cont. MBA-6 MBA-7 MBA-8 MBA-9 13-4-00082 16-4-00296 16-4-00297 13-4-00079 151” Fort Upper Wing 100” Fort (L) Ladder Leg 100” Fort (R) Ladder Leg Universal Fort Ladder Step QTY. 1 QTY. 1 QTY. 1 QTY. 7 Universal Deck UD-1 UD-2...
  • Page 14 Universal Rail Bundle RAIL-1 RAIL-2 RAIL-1 12-4-00140 12-4-00141 15-4-00008 Universal Rail Top Universal Rail Bottom Universal Rail Picket QTY. 1 QTY. 1 QTY. 5 6.4 Fort Rockwall RW-1 RW-2 RW-3 16-4-00306 16-4-00305 11-4-00138 96 1/2” Fort (R) RW Ladder Leg 96 1/2”...
  • Page 15 6.4 Fort Rockwall Cont. RW-7 RW-8 16-4-00216 16-4-00218 Universal Rope Block Uni. Entrapment Block QTY. 1 QTY. 2 Megadeck Fort Wood Roof Bundle WR-1 WR-2 WR-3 13-4-00078 64-7-00208 64-7-00209 Universal Wood Roof Support Fort Wood Roof Fan Fort Wood Roof Panel QTY.
  • Page 16 Megadeck Fort Wood Roof Bundle Cont. WR-7 WR-8 WR-9 64-7-00238 64-7-00240 64-7-00241 MD (L) Bottom Dormer WR Panel MD (R) Bottom Dormer WR Panel MD (R) Angled WR Panel QTY. 1 QTY. 1 QTY. 1 WR-10 64-7-00242 MD (L) Angled WR Panel QTY.
  • Page 17 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-1 Mfh-2 Mfh-4 Mfh-5 40-1-00001 40-1-00002 40-1-00020 40-1-00022 3/8” acorn nut 1/2” acorn nut 1 5/8” Coated deck screw 2 1/2”...
  • Page 18 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-9 Mfh-10 40-1-00054 40-1-00055 1/4” x 2” hex lag screw 1/4” x 3” hex lag screw QtY. 14 QtY.
  • Page 19 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-20 Mfh-21 Mfh-22 Mfh-23 40-1-00082 40-1-00083 40-1-00084 40-1-00105 3/8” uss flatwasher 1/2” uss flatwasher 3/4” uss flatwasher 5/16”...
  • Page 20 megadeck fort hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) Mfh-25 40-1-00115 3/8” x 5 1/2” Carriage bolt QtY. 6 Megadeck 6.4 hardware bag Mfh-26 41-1-00025 6Mh-1 6Mh-2 3/8”...
  • Page 21 megadeck 6.4 hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) 6Mh-5 40-1-00061 3/8” x 5” hex lag screw QtY. 2 6Mh-6 6Mh-7 6Mh-8 6Mh-9 40-1-00074 40-1-00081 40-1-00082 40-1-00083 1/2”...
  • Page 22 megadeck 6.4 hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) 6Mh-11 40-1-00101 1/2” x 8 1/2” Carriage bolt QtY. 3 6Mh-12 40-1-00114 1/2” x 5” Carriage bolt QtY.
  • Page 23 6.4 fort rockwaLL hardware bag INStaLLer Note: (YoU mUSt aSSembLe thIS ProdUct IN accordaNce wIth theSe aSSembLY INStrUctIoNS. wheN comPLete gIVe maNUaL to owNer.) rWh-1 rWh-2 rWh-3 rWh-5 40-1-00067 40-1-00077 40-1-00081 40-1-00082 1/4” x 1 1/2” Pan Phillips M/s 1/4” x 7/16” 4 Prong t-nut 1/4”...
  • Page 24 Megadeck Fort- Standard Box MST-1 MST-3 MST-4 MST-2 59-1-00013 57-2-00005 56-1-00012 57-2-00004 Tree Frogs Plaque 1 1/4” Playgrip Ladder Handle Ductile Iron Swing Hanger 1 1/4” Playgrip Safety Handle QTY. 1 QTY. 2 QTY. 2 QTY. 5 MST-5 MST-6 59-1-00011 58-1-00013 6.4 Megadeck Fort Box A.
  • Page 25 5.4 Fort Rockwall Box (Multi- Color and Green) RWB-1 RWG-1 RWB-2 & RWG-2 36-1-00023 36-1-00024 65-7-00017 Large Rock- (Multi Color) Large Rock- Green 16’ Yellow Rope QTY. 16 QTY. 16 QTY. 1...

  • Page 26: Ladder Assembly

    LADDER ASSEMBLY ROCKWALL BOARD PARTS NEEDED HARDWARE NEEDED MBA-7- 100” Fort (L) Ladder Leg- 6MH-3- 1/4” x 4 1/2” Hex Lag Screw- (28) MBA-8- 100” Fort (R) Ladder Leg- 6MH-7- 1/4” USS Flatwasher- (28) MBA-9- Universal Fort Ladder Step- RWH-1- 1/4” x 1 1/4” Pan Phillips M/S- (36) RW-5- Uni.
  • Page 27 ROCKWALL ASSEMBLY MEGADECK DECKS PARTS NEEDED HARDWARE NEEDED RW-1- 96.5” Fort (R) RW Ladder Leg- RW-2- 96.5” Fort (L) RW Ladder Leg- RWH-6- 2 1/2” Coated Deck Screw- (60) RW-3- Uni. Fort RW Board w/ Rope Hole- (1) RW-4- Uni. Fort RW Board Blank- MDD-4- 2 1/2”...

  • Page 28: Rail Assembly

    UNIVERSAL DECKS RAIL ASSEMBLY PARTS NEEDED HARDWARE NEEDED UD-1- Small Deck Board- UD-2- Large Deck Board- UD-5- 2 1/2” Coated Deck Screw- (42) UD-3- Deck Runners- UD-4- Deck Support- RAIL-4- 2 1/2” Coated Deck Screw- (20) (per rail) RAIL-1- Universal Rail Top- RAIL-2- Universal Rail Bottom- RAIL-3- Universal Rail Picket- REPEAT THIS STEP FOR 2 UNIVERSAL DECKS...
  • Page 29 (L) SIDE MEGADECK WALL PARTS NEEDED HARDWARE NEEDED MBA-1- 128” Fort Corner Post- MBA-2- 128” Megadeck Corner Post- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- (24) MB2-2 Uni. 8 Hole Facia- MB2-3 14 Hole Megadeck Facia- MFH-20- 3/8” USS Flatwasher- (24) 54"...
  • Page 30 (L) SIDE MEGADECK WALL (R) SIDE MEGADECK WALL PARTS NEEDED HARDWARE NEEDED MFH-18- 5/16 x 3/8” 4 Prong T-Nut- MFH-23- 5/16” x 1” Hex Bolt- MFH-20- 3/8” USS Flatwasher- 25 1/4" GAP 54" GAP...
  • Page 31 (R) SIDE MEGADECK WALL PARTS NEEDED HARDWARE NEEDED MBA-1- 128” Fort Corner Post- MBA-2- 128” Megadeck Corner Post- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- (24) MB2-2 Uni. 8 Hole Facia- MB2-3 14 Hole Megadeck Facia- MFH-20- 3/8” USS Flatwasher- (30) MFH-18- 5/16”...

  • Page 32: Main Assembly

    MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB2-1- Uni. Fort 4 Hole Facia- MFH-20- 3/8” USS Flatwasher- (16) MBA-5- 156 1/4” Fort Lower Wing- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- (16) MBA-6- 151” Fort Upper Wing-...
  • Page 33 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-1- Universal Fort Main Beam- MFH-2- 1/2” Acorn Nut- MFH-3- 1/2” x 7” Carriage Bolt- MB1-3- (L) Gusset Bracket- MFH-22- 3/4” USS Flatwasher- MFH-21- 1/2” USS Flatwasher- MB1-4- (R) Gusset Bracket- MFH-17- 1/2” Split Lockwasher- MFH-7- 1/2”...
  • Page 34 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-1- Universal Main Beam- MFH-2- 1/2” Hex Nut- MFH-7- 1/2” Hex Nut- MFH-17- 1/2” Split Lockwasher- MFH-21- 1/2” USS Flatwasher- MFH-24- 1/2” x 9” Hex Bolt- 6MH-11- 1/2” x 8 1/2” Carriage Bolt- 6MH-10- 3/4” USS Flatwasher- 6MH-9- 1/2”...
  • Page 35 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-3- (L) Gusset Bracket- MFH-20 3/8” USS Flatwasher- MFH-12- 3/8” x 3 1/2” Hex Lag Bolt- MB1-4- (R) Gusset Bracket- TAKE OFF THE CARRIAGE BOLT, WASHERS, AND NUTS. MAIN BEAM WILL BE HELD BY GUSSETS TEMPORARILY...
  • Page 36 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Universal Deck- MFH-19- 1/4” x 4 1/2” Hex Lag Screw- (16) MFH-11- 1/4” USS Flatwasher- (16) BOTTOM VIEW...
  • Page 37 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB2-6- Universal Rail Bottom- MFH-10- 1/4” x 3” Hex Lag Screw- MFH-19- 1/4” USS Flatwasher- MBA-3- 76” Fort Wing Mainbeam- 6MH-11- 1/2” x 8 1/2” Carriage Bolt- MFH-21- 1/2” USS Flatwasher- MFH-17- 1/2” Split Lockwasher- MFH-7- 1/2”...
  • Page 38 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Universal Deck- MFH-19- 1/4” x 4 1/2” Hex Lag Screw- MB2-4- Universal Filler- MFH-11- 1/4” USS Flatwasher-...
  • Page 39 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MBA-4- 85 1/2” Fort Wing Suppport- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- MFH-20- 3/8” USS Flatwasher- 6MH-12- 1/2” x 5” Carriage Bolt- 6MH-10- 3/4” USS Flatwasher- 6MH-6- 1/2” Split Lockwasher- 6MH-2- 1/2” Hex Nut- 6MH-1- 1/2”...
  • Page 40 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-5- Universal Fort Upright- MFH-2- 1/2” Acorn Nut- MFH-7- 1/2” Hex Nut- MFH-17- 1/2” Split Lockwasher- MFH-21- 1/2” USS Flatwasher- MFH-22- 3/4” USS Flatwasher- MFH-3- 1/2” x 7” Carriage Bolt- MFH-24- 1/2” x 9” Hex Bolt-...
  • Page 41 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Megadeck Deck with Attached Uni. Fillers- 6MH- 11- 1/2” x 8 1/2” Carriage Bolt- MFH-22- 3/4” USS Flatwasher- MB1-5- Universal Fort Upright- MFH-21- 1/2” USS Flatwasher- MFH-17- 1/2” Split Lockwasher- MFH-7- 1/2” Hex Nut- MFH-2- 1/2”...
  • Page 42 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-6- Uni. Fort WR Center Post- 6MH-8- 3/8” USS Flatwasher- MFH-20- 3/8” USS Flatwasher- Ladder Assembly- 6MH-5- 3/8” x 5” Hex Lag Screw- MST-6- Fort Ladder Bracket- 6MH-4- 3/8” x 3 1/2” Hex Lag Screw- MFH-12- 3/8”...
  • Page 43 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED Rockwall Assembly- RWH-4- 3/8” x5” Hex Lag Screw- MB2-5- Fort Playhouse Panel Facia- RWH-5- 3/8” USS Flatwasher- MFH-12- 3/8” x 3 1/2” Hex Lag Screw- MFH-20- 3/8” USS Flatwasher-...
  • Page 44 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED MB1-6- Uni. Fort WR Center Post- 6MH-8- 3/8” USS Flatwasher- MFH-20- 3/8” USS Flatwasher- Ladder Assembly- 6MH-5- 3/8” x 5” Hex Lag Screw- MST-6- Fort Ladder Bracket- 6MH-4- 3/8” x 3 1/2” Hex Lag Screw- MFH-12- 3/8”...
  • Page 45 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED RW-7- Universal Rope Block- MFH-8- 3/8” x 5” Hex Bolt- MFH-26- 3/8” Bolt Cup- MFH-20- 3/8” USS Flatwasher- MFH-16- 3/8” Split Lockwasher- MFH-13- 3/8” Nylon Insert Hex Nut- MFH-1- 3/8” Acorn Nut- MST-4- Ductile Iron Hanger- RWH-4- 3/8”...
  • Page 46 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-1- Universal Wood Roof Support- MFH-1- 3/8” Acron Nut- MFH-6- 3/8” Hex Nut- WR-3- Fort Wood Roof Panel- MFH-16- 3/8” Split Lockwasher- MFH-20- 3/8” USS Flatwasher- MFH-21- 1/2” USS Flatwasher- MFH-25- 3/8” x 5 1/2” Carriage Bolt- MFH-19- 1/4”...

  • Page 47: Back Side View

    MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-3- Fort Wood Roof Panel- MFH-19- 1/4” USS Flatwasher- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- WR-4- Uni. Wood Roof Peak Facia- MFH-5- 2 1/2” Coated Deck Screw- BACK SIDE VIEW (REPEAT FOR BOTH SIDES)
  • Page 48 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-9- Megadeck (R) Angled WR Panel- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- MFH- 19- 1/4” USS Flatwasher- WR-3- Fort Wood Roof Panel-...
  • Page 49 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-3- Fort Wood Roof Panel- MFH-19- 1/4” USS Flatwasher- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- WR-4- Uni. Wood Roof Peak Facia- MFH-5- 2 1/2” Coated Deck Screw- (14)
  • Page 50 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-1- Universal Fort WR Support- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- MFH- 19- 1/4” USS Flatwasher- WR-5- MD (L) Top Dormer Panel- MFH-25- 3/8” x 5 1/2” Carriage Bolt- MFH-21- 1/2” USS Flatwasher- MFH-20- 3/8”...
  • Page 51 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-6- Megadeck (R) Top WR Dormer Panel- MFH-19- 1/4” USS Flatwasher- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- WR-4- Uni. Wood Roof Peak Facia- MFH-5- 2 1/2” Coated Deck Screw- (14)
  • Page 52 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-7- MD (L) Bottom Dormer Panel- MFH-11- 1/4” x 4 1/2” Hex Lag Screw- MFH- 19- 1/4” USS Flatwasher- WR-5- MD (R) Bottom Dormer Panel-...
  • Page 53 MAIN ASSEMBLY PARTS NEEDED HARDWARE NEEDED WR-2- Megadeck Fort Wood Roof Fan- MFH-5- 2 1/2” Coated Deck Screw- (24) WOOD SCREWS GO THROUGH THE WOOD ROOF BOARDS INTO THE SUPPORTS OF THE OVERLAPPING PANELS...

  • Page 54: Ship's Wheel

    TELESCOPE INSTALL SHIP’S WHEEL PARTS NEEDED HARDWARE NEEDED Ship’s Wheel- BXA-2 or BXB-2- Telescope-...
  • Page 55 SLIDE INSTALL TRAPEZE BAR PARTS NEEDED HARDWARE NEEDED Slide- MFH-15- #14 x 2” Pan Phillips T/S- Trapeze Bar- MFH-19- 1/4” USS Flatwasher- MST-5- Spring Clip 10x100mm INSTALL SLIDE IN THE OPENING NEXT TO THE TRAPEZE BAR...

  • Page 56: Rockwall Rope

    ROCKWALL ROPE SAFETY HANDLES 1 PARTS NEEDED HARDWARE NEEDED MST-2- 11” Safety Handle- MFH-19- 1/4” USS Flatwasher- MFH-15- #14 x 2” Pan Phillips T/S- RWB-2 or RWG-2- 16’ Yellow Rope- String the rope through Universal Rope Block on the Fort tie a knot securing it in the rope block.
  • Page 57 LADDER HANDLES SAFETY HANDLES 2 PARTS NEEDED HARDWARE NEEDED MST-3- 1 1/4” Playgrips Ladder Handles- MFH-19- 1/4” USS Flatwasher- MFH-15- #14 x 2” Pan Phillips T/S- MST-2- 11” Safety Handle-...
  • Page 58 6-4 Megadeck Playhouse Panel Install Manual Version 6.14 Tools Needed for Assembly Tape Measure 24” Level Angle Square Phillips Screw Driver 3/8” Cordless Drill or Electric Drill 3/8” Drive Ratchet or Electric Impact Gun Claw Hammeror Rubber Mallet Pliers or Vise Grips 7/16”...
  • Page 59 ● Be sure that the sealant you select is non-toxic and child safe. Your local tree frogs wooden swing set factory dealer may offer a complete power wash and reseal and maintenance program.

  • Page 60: Important - Please Read

    Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the tree frogs swing set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will enjoy your play system for many years to come.
  • Page 61 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ●...
  • Page 62 consumer informAtion sHeet for PLAYgrounD surfAcing mAteriALs the u.s. consumer Product safety commission (cPsc) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.

  • Page 63: Part Description

    6-4 megadeck fort Playhouse Panels Item No. Part No. Part Description QTY. 6PP-1 64-7-00223 fort Door 6PP-2 10-4-00282 fort Door knoB PLAte 6PP-3 10-4-00281 fort PLAYHouse PAneL Door stoP 6PP-4 64-7-00226 fort PLAYHouse store winDow PAneL 6PP-5 64-7-00225 fort PLAYHouse DouBLe PAneL 6PP-6 13-4-00068 uniVersAL 6-HoLe fAciA...
  • Page 64 6.4 Megadeck Fort Playhouse Panels 6PP-1 6PP-2 6PP-3 64-7-00223 10-4-00282 10-4-00281 Fort Door Fort Door Knob Plate Fort Playhouse Panel Door Stop QTY. 1 QTY. 1 QTY. 1 6PP-4 6PP-5 6PP-6 64-7-00226 64-7-00225 13-4-00068 Fort Playhouse Store Window Fort Playhouse Double Panel Universal 6-Hole Facia QTY.
  • Page 65 6.4 Megadeck Fort Playhouse Panels 6PP-7 6PP-8 6PP-9 64-7-00245 64-7-00229 64-7-00246 Megadeck Playhouse Panel 6.4 Fort Door Side Add-on 6.4 Megadeck Playhouse Panel QTY. 1 QTY. 1 QTY. 1 6PP-9 64-7-00228 6.4 Fort Playhouse Wing Side Panel QTY. 1...
  • Page 66 megadeck fort Playhouse Panel hardware bag Installer note: (you must assemble thIs Product In accordance wIth these assembly InstructIons. when comPlete gIVe manual to owner.) 5Ph-1 5Ph-2 40-1-00082 40-1-00059 3/8” uss flatwasher 3/8” x 3 1/2” hex lag screw QtY. 47 QtY.
  • Page 67 6.4 Megadeck Playhouse Panel Install Parts Needed Hardware Needed 6PP-6- Universal 6- Hole Facia- MPH-1- 3/8” USS Flatwasher- (13) 6PP-7- Megadeck Playhouse Panel- MPH-2- 3/8” x 3 1/2” Hex Lag Screw- (13)
  • Page 68 6.4 Megadeck Playhouse Panel Install Parts Needed Hardware Needed 6PP-4- Fort Playhouse Store Window Panel- MPH-1- 3/8” USS Flatwasher- (12) 6PP-5- Fort Playhouse Double Panel- MPH-2- 3/8” x 3 1/2” Hex Lag Screw- (12)
  • Page 69 6.4 Megadeck Playhouse Panel Install Parts Needed Hardware Needed 6PP-5- Fort Playhouse Double Panel- MPH-1- 3/8” USS Flatwasher- (12) 6PP-9- Megadeck 6.4 Playhouse Panel- MPH-2- 3/8” x 3 1/2” Hex Lag Screw- (12)
  • Page 70 6.4 Megadeck Playhouse Panel Install Parts Needed Hardware Needed 6PP-10- 6.4 Fort Plahouse Wing Side Panel- MPH-1- 3/8” USS Flatwasher- (10) 6PP-9- Megadeck 6.4 Playhouse Panel- MPH-2- 3/8” x 3 1/2” Hex Lag Screw- (10)
  • Page 71 6.4 Megadeck Playhouse Panel Install Parts Needed Hardware Needed 6PP-8- 6.4 Fort Playhouse Door Side Panel- MPH-1- 3/8” USS Flatwasher- 6PP-3- Fort Playhouse Panel Door Stop- MPH-2- 3/8” x 3 1/2” Hex Lag Screw- MPH-4- 2 1/2” Coated Deck Screw-...
  • Page 72 6.4 Megadeck Playhouse Panel Install Parts Needed Hardware Needed 6PP-1- Fort Door- MPH-5- Spring Door Hinge w/ Hardware- 6PP-2- Fort Door Knob Plate- MPH-4- 1 5/8” Coated Deck Screws- BACK VIEW...
  • Page 73 6.4 Megadeck Playhouse Panel Install Hardware Needed MPH-6- Door Pull w/ Hardware-...
  • Page 74 Megadeck Lower Floor Install Manual Version 6.14 Tools Needed for Assembly Tape Measure 24” Level Angle Square Phillips Screw Driver 3/8” Cordless Drill or Electric Drill 3/8” Drive Ratchet or Electric Impact Gun Claw Hammeror Rubber Mallet Pliers or Vise Grips 7/16”...
  • Page 75 ● Be sure that the sealant you select is non-toxic and child safe. Your local tree frogs wooden swing set factory dealer may offer a complete power wash and reseal and maintenance program.
  • Page 76 Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the Tree Frogs Swing Set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will enjoy your play system for many years to come.
  • Page 77 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ●...
  • Page 78 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS the u.s. consumer Product safety commission (cPsc) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.
  • Page 79 Fort Pic Nic/ Lower Floor Bundle Item No. Part No. Part Description QTY. PLf-1 12-4-00139 Universal Deck Board PLf-2 12-4-00180 Universal Fort Picnic Table/ Lower Floor Supports PLf-3 12-4-00181 Universal Fort Picnic Table/ Lower Floor Board PLf-4 12-4-00182 Universal Fort Picnic Table/ Lower Floor Runner PLf-5 12-4-00183 universal fort Picnic table/ Lf runner (no Holes)
  • Page 80 Fort Picnic Table/ Lower Floor Lumber PLF-1 PLF-2 PLF-3 12-4-00139 12-4-00180 12-4-00181 Universal Deck Board Lower Floor Supports Lower Floor Board QTY. 1 QTY. 4 QTY. 4 PLF-4 PLF-5 PLF-6 12-4-00182 12-4-00183 12-4-00184 Lower Floor Runner Lower Floor Runner (No Holes) Lower Floor Seat Runner QTY.
  • Page 81 Megadeck Fort Lower Floor Add-On Bundle Lumber MFL-1 MFL-2 MFL-3 12-4-00194 12-4-00139 13-4-00080 Megadeck Lower Floor Support Megadeck Lower Floor Filler Lower Floor Board QTY. 2 QTY. 2 QTY. 4 MFL-4 MFL-5 12-4-00196 12-4-00195 Small Lower FLoor Board Lower Floor Runner QTY.
  • Page 82 Fort PICNIC tAble/ lower Floor HArdwAre INStAller Note: (YoU MUSt ASSeMble tHIS ProdUCt IN ACCordANCe wItH tHeSe ASSeMblY INStrUCtIoNS. wHeN CoMPlete GIVe MANUAl to owNer.) Plh-1 Plh-2 40-1-00022 40-1-00056 2 1/2” Coated deck screw 1/4” x 4 1/2” hex lag screw QtY.
  • Page 83 MeGAdeCk Fort lower Floor HArdwAre bAG INStAller Note: (YoU MUSt ASSeMble tHIS ProdUCt IN ACCordANCe wItH tHeSe ASSeMblY INStrUCtIoNS. wHeN CoMPlete GIVe MANUAl to owNer.) Mlh-1 Mlh-2 40-1-00082 40-1-00059 3/8” uss flatwasher 3/8” x 3 1/2” hex lag screw QtY. 4 QtY.
  • Page 84 Picnic Table & Seat Assemblies Parts needed Hardware needed PLF-1- Universal Deck Board- PLF-7- Lower Floor Seat Runner (No Holes)- PLH-1- 2 1/2” Coated Deck Screws- (78) PLF-6- Lower Floor Seat Runner- (4) PLF-8- Lower Floor Board- PLF-5- Table Lower Floor Runner (No Holes)- PLF-3- Lower Floor Board- PLF-4- Lower Floor Runner- 25 1/4”...
  • Page 85 Megadeck Floor and Setup Parts needed Hardware needed MFL-2- Megadeck lower Floor Filler- MLH-5- 2 1/2” Coated Decdk Screws- (42) MFL-3- Lower Floor Board- MFL-4- Small Lower Floor Board- MFL-5- Lower Floor Runner- 28 3/4” Gap on both sides In this step we are going to remove the Universal 8- Hole Facia from the unit and set the hardware to the side.
  • Page 86 Parts needed Hardware needed MFL-1- Megadeck Floor Support- MLH-2- 3/8” x 3 1/2” Hex Lag Screw- Megadeck Floor Panel- MLH-3- 3/8” USS Flatwasher- Floor Supports are 1/2” off the ground making the deck level with the bottom facia board...
  • Page 87 Prep & Lower Floor Main Parts needed Hardware needed PLF-2- Lower Floor Supports- PLH-3- 3/8” USS Flatwasher- PLH-5- 3/8” x 3 1/2” Hex Lag Screw- In this step we are taking off the bottom 8 Hole Facia to prep for next step...
  • Page 88 Lower Floor Main Parts needed Hardware needed Seat Assembly- PLH-2- 1/4” x 4 1/2” Hex Lag Screw- Table Assembly- PLH-4- 1/4” USS Flatwasher-...
  • Page 89 Lower Floor Main Parts needed Hardware needed Seat Assembly- PLH-2- 1/4” x 4 1/2” Hex Lag Screw- PLH-4- 1/4” USS Flatwasher- In this step we finish the lower floor by putting back on the 8- Hole Facia...

Table of Contents