Download
Share
Print this page
Tree Frogs America's Best Value In Swing Sets Parrot Island Fort Install Manual
  1. Manuals
  2. Brands
  3. Tree Frogs Manuals
  4. Play Sets & Playground Equipment
  5. America's Best Value In Swing Sets Parrot Island...
  6. Install manual

Tree Frogs America's Best Value In Swing Sets Parrot Island Fort Install Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Tape Measure
Phillips Screw Driver
Claw Hammeror Rubber Mallet
9/16" Deep Well Socket
Phillips Head Screw Bits
Please familiarize yourself with the install manual, parts/components and general construction process of your new swing set before
getting started. Approximate assembly time: 6 to 8 hours. 6 foot unobstructed safety perimeter around swing set recommended.
HOUSTON, TX 77041 • WWW.TREEFROGSSWINGSETS.COM • © 2013 KID STRUCTURES INC.
Parrot Island Fort
Install Manual
Version 12.16
Tools Needed for Assembly
24" Level
3/8" Cordless Drill or Electric Drill
Pliers or Vise Grips
3/4" Deep Well Socket
An Adult with two Adult Helpers
Angle Square
3/8" Drive Ratchet or Electric Impact Gun
7/16" Deep Well Socket
1/8", 1/4", and 9/16" Drill Bits

Advertisement

loading
Need help?

Need help?

Do you have a question about the America's Best Value In Swing Sets Parrot Island Fort and is the answer not in the manual?

Questions and answers

Related Manuals for Tree Frogs America's Best Value In Swing Sets Parrot Island Fort

Summary of Contents for Tree Frogs America's Best Value In Swing Sets Parrot Island Fort

  • Page 1 Parrot Island Fort Install Manual Version 12.16 Tools Needed for Assembly Tape Measure 24” Level Angle Square Phillips Screw Driver 3/8” Cordless Drill or Electric Drill 3/8” Drive Ratchet or Electric Impact Gun Claw Hammeror Rubber Mallet Pliers or Vise Grips 7/16”...
  • Page 2 Rock Wall: 150 Lbs. All Slides: 125 Lbs. Tree Frogs recommends that the weight limits for all components must not be exceeded. Failure to adhere to these and other safety guidelines could result in damage to the swing set and/or injury to the users. Please keep this install manual for future reference.

  • Page 3: Important - Please Read

    Most cracks are not warrantable, however if you believe that the integrity of your play set is compromised by this natural occurrence, please contact the Tree Frogs Swing Set Dealer that you purchased your swing set from. We appreciate your purchase and know that you will enjoy your play system for many years to come.
  • Page 4 ● Depending on your experience, assembly of our play sets can take as little as 6 hours up to 24 hours, depending on size, after inventory of parts; therefore, we recommend you set aside a full two days for assembly. ● Identify all of the parts for your play set. Empty each box and lay out boards so you can see each part. Your instruction book will have detailed drawings that will make it easy for you to recognize individual parts. Keep all hardware and metal parts separate from wooden pieces.
  • Page 5 CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS The U.S. Consumer Product Safety Commission (CPSC) estimates that about 100,000 playground equipment related injuries resulting from falls to the ground surface are treated annually in U.S. hospital emergency rooms. Injuries involving this hazard pattern tend to be among the most serious of all playground injuries, and have the potential to be fatal, particularly when the injury is to the head.
  • Page 6 Parrot Island Fort- Base Lumber Item No. Part No. Part Description QTY. PFB-1 SMALL CORNER FACIA PFB-2 PICNIC SEAT SUPPORT PFB-3 TIC TAC TOE PFB-4 SPINDLE PFB-5 PICNIC TABLE SUPPORT PFB-6 CORNER FACIA PFB-7 DECK SUPPORT PFB-8 CENTER TARP BOARD PFB-9 END TARP BOARD PFB-10...
  • Page 7 Parrot Island Fort- Playhouse Panels Lumber Item No. Part No. Part Description QTY. PFPP-1 LEFT WINDOW SHUTTER PFPP-2 RIGHT WINDOW SHUTTER PFPP-3 DOOR SIDE FACIA PFPP-4 PANEL BOARD #1 PFPP-5 PANEL BOARD #2 PFPP-6 PANEL FACIA PFPP-7 STORE SIDE PANEL FACIA PFPP-8 UPPER SWINGBEAM SIDE FACIA PFPP-9...
  • Page 8 Parrot Island Fort- Wood Roof Lumber Item No. Part No. Part Description QTY. PFWR-1 FAN BOARD PFWR-2 CENTER FAN BOARD PFWR-3 BOTTOM FAN BOARD PFWR-4 WOOD ROOF SUPPORT PFWR-5 PEAK FACIA PFWR-6 CENTER FAN FACIA PFWR-7 WOOD ROOF CENTER POST PFWR-8 WOOD ROOF SUPPORT PFWR-9...
  • Page 9 Parrot Island Fort- Rockwall Hardware Item No. Part No. Part Description QTY. RWH-1 40-1-00022 2 1/2” COATED DECK SCREW RWH-2 40-1-00041 3/8” X 1 1/2” HEX BOLT RWH-3 40-1-00066 1/4” X 1 1/4” PAN PHILLIPS M/S RWH-4 40-1-00077 1/4” 4- PRONG T-NUT RWH-5 40-1-00080 3/8”...
  • Page 10 Parrot Island Fort- Slide Hardware Item No. Part No. Part Description QTY. SH-1 40-1-00065 1/4” X 1” PAN PHILLIPS M/S SH-2 40-1-00081 1/4” USS FLATWASHER SH-3 40-1-00077 1/4” 4-PRONG T-NUT Parrot Island Fort- Playhouse Hardware PLH-1 40-1-00123 1 1/2” COATED DECK SCREW PLH-2 40-1-00116 1/4”...
  • Page 11 Parrot Island Fort- Base Accessories Item No. Part No. Part Description QTY. PIA-1 56-1-00012 DUCTILE IRON SWING HANGERS PIA-2 57-2-00001 1” PLAYGRIP SAFETY HANDLES PIA-3 57-2-00003 1” PLAYGRIP U-MOUNT LADDER HANDLES PIA-4 58-1-00004 SMALL 90 DEGREE BRACKET PIA-5 58-1-00006 90 DEGREE LADDER/ ROCKWALL BRACKET PIA-6 58-1-00010 SWINGBEAM PLATE...
  • Page 12 Parrot Island- Base Lumber PFB-1 PFB-2 PFB-3 PFB-4 9” Small Corner Facia 13” Picnic Seat Support 16” Tic Tac Toe Board 25” Spindle QTY. 2 QTY. 2 QTY. 2 QTY. 14 PFB-5 PFB-6 PFB-7 PFB-8 25” Picnic Table Support 31 13/16” Corner Facia 51 1/8”...
  • Page 13 Parrot Island- Base Lumber PFB-13 PFB-14 PFB-15 PFB-16 36” 1-Rock Rockwall Board 36” 2- Rock Rockwall Board 36” Rockwall Board w/ Rope Hole 60 1/4” 6- Hole Facia QTY. 6 QTY. 3 QTY. 1 QTY. 2 PFB-17 PFB-18 PFB-19 PFB-20 60 1/4”...
  • Page 14 Parrot Island- Base Lumber PFB-25 PFB-26 PFB-27 PFB-28 65 3/4” Left Ladder Leg 65 3/4” Rockwall Leg 72” Tarp Center Post 51 1/8” Mainbeam QTY. 1 QTY. 2 QTY. 2 QTY. 2 PFB-29 PFB-30 PFB-31 PFB-32 9” Rope Block 16” Trapeze Gusset 51 1/8”...
  • Page 15 Parrot Island Fort- Playhouse Panel Lumber PFPP-1 PFPP-2 PFPP-3 PFPP-4 17” Left Window Shutter 17” Left Window Shutter 31 13/16” Door Side Facia 46 7/16” Panel Board #1 QTY. 6 QTY. 6 QTY. 2 QTY. 4 PFPP-5 PFPP-6 PFPP-7 PFPP-8 46 7/16”...
  • Page 16 Parrot Island Fort- Playhouse Panel Lumber PFPP-13 PFPP-14 60 1/4” Door Side Arches 50 7/8” Center Panel Support QTY. 1 QTY.. 1...
  • Page 17 Parrot Island Fort- Treehouse Panel Lumber PFTP-1 PFTP-2 PFTP-3 PFTP-4 10 1/2” Upper Short Support 12” Right Window Shutter 12” Left Window Shutter 12 1/2” Upper Small Side Board QTY. 2 QTY. 4 QTY. 4 QTY. 12 PFTP-5 PFTP-6 PFTP-7 PFTP-8 13 1/2”...
  • Page 18 Parrot Island Fort- Treehouse Panel Lumber PFTP-13 PFTP-14 PFTP-15 PFTP-16 25” Upper Side Board 25” Upper Side Board 28” Right Upper Board 30 1/8” Large Right Upper Board QTY. 2 QTY. 2 QTY. 4 QTY. 4...
  • Page 19 Parrot Island Fort- Swingbeam Lumber PSB-1 PSB-2 PSB-3 PSB-4 7 5/8” Center A-Frame Block 12 7/8” A-Frame Block 12 7/8” A-Frame Block Sinked 68” A-Frame Crossmember QTY. 1 QTY. 1 QTY. 1 QTY. 1 PSB-5 PSB-7 113” A-Frame Leg 122” 3 Postion Swingbeam QTY.
  • Page 20 Parrot Island Fort- Wood Roof Lumber PFWR-1 PFWR-2 PFWR-3 PFWR-4 7 5/8” Fan Board 12 1/8” Center Fan Board 30 11/16” Bottom Fan Board 46 1/2” Wood Roof Support QTY. 4 QTY. 2 QTY. 2 QTY. 2 PFWR-5 PFWR-6 PFWR-7 PFWR-8 8 7/8”...
  • Page 21 PARROT ISLAND FORT- BASE HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) PIH-1 PIH-2 PIH-3 PIH-7 40-1-00001 40-1-00104 40-1-00026 40-1-00054 3/8” Acorn Nut Plated 2” Coated Deck Screw 3/8”...
  • Page 22 PARROT ISLAND FORT- BASE HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) PIH-9 PIH-10 40-1-00056 40-1-00059 1/4” x 4 1/2” Hex Lag Screw 3/8” x 3 1/2” Hex Lag Screw QTY.
  • Page 23 PARROT ISLAND FORT- BASE HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) PIH-19 PIH-20 40-1-00123 40-1-00061 1 1/2” Coated Deck Screw 3/8” x 5” Hex Lag Screw QTY.
  • Page 24 PARROT ISLAND FORT- STEP LADDER HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SLH-1 SLH-2 SLH-3 SLH-5 40-1-00022 40-1-00041 40-1-00080 40-1-00082 2 1/2” Coated Deck Screw 3/8” x 1 1/2” Hex Bolt 3/8”...
  • Page 25 PARROT ISLAND FORT- ROCKWALL & PICNIC TABLE HARDWARE BAGS INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) RWH-3 RWH-1 RWH-2 RWH-4 40-1-00066 40-1-00022 40-1-00041 40-1-00077 1/4” x 1 1/4” Pan Phillips M/S 2 1/2”...
  • Page 26 PARROT ISLAND FORT SWINGBEAM HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SBH-1 SBH-2 SBH-3 40-1-00001 40-1-00002 40-1-00011 3/8” Acorn Nut Plated 1/2” Acorn Nut Plated 1/2” x 3 1/2” Carriage Bolt QTY.
  • Page 27 PARROT ISLAND FORT SWINGBEAM HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SBH-6 SBH-7 SBH-9 40-1-00026 40-1-00028 40-1-00059 3/8” Hex Nut 1/2” Hex Nut 3/8” x 3 1/2” Hex Lag Screw QTY.
  • Page 28 PARROT ISLAND FORT SWINGBEAM HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SBH-14 SBH-15 SBH-16 SBH-18 40-1-00082 40-1-00083 40-1-00084 40-1-00122 3/8” USS Flatwasher 1/2” USS Flatwasher 3/4” USS Flatwasher #14 x 1”...
  • Page 29 PARROT ISLAND FORT SWINGBEAM HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) SBH-19 40-1-00124 1/2” x 12” Hex Bolt QTY. 1 SBH-20 PARROT ISLAND FORT SLIDE HARDWARE BAG 41-1-00025 3/8”...
  • Page 30 PARROT ISLAND FORT- PLAYHOUSE HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) PLH-1 PLH-2 PLH-3 PLH-4 40-1-00123 40-1-00116 40-1-00055 40-1-00077 1 1/2” Coated Deck Screw 1/4” x 2” Hex Bolt 1/4”...
  • Page 31 PARROT ISLAND FORT- TARP HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) TH-1 TH-2 TH-3 40-1-00022 40-1-00056 40-1-00081 2 1/2” Coated Deck Screw 1/4” x 4 1/2” Hex Lag Screw 1/4”...
  • Page 32 PARROT ISLAND FORT- WOOD ROOF HARDWARE BAG INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.) WRH-2 WRH-3 WRH-1 WRH-5 40-1-00001 40-1-00019 40-1-00104 40-1-00080 1 1/4” Coated Deck Screw 2” Coated Deck Screw 3/8”...
  • Page 33 Parrot Island Fort- Accessories (Color Depends on Package) PIA-1 PIA-2 PIA-3 PIA-4 56-1-00012 57-2-00001 57-2-00003 58-1-00004 Ductile Iron Swing Hangers 1” Playgrip Safety Handles 1” Playgrip U-Mount Ladder Handles Small 90 Degree Bracket QTY. 6 QTY. 4 QTY. 2 QTY. 6 PIA-5 PIA-6 PIA-7...
  • Page 34 Parrot Island Fort- Accessories (Color Depends on Package) PIA-13 PIA-14 PIA-15 BAB-1 60-1-00005 65-7-00017 39-1-00010 36-1-000XX 16” Trapeze Bar w/ Rings 14’ Yellow Rope Tic Tac Toe Set Rockwall Rocks QTY. 1 QTY. 2 QTY. 1 QTY. 12 BAB-2 PA-1 TARP-1 60-1-000XX 58-1-00004...

  • Page 35: Parts Needed

    Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-32- Trapeze Arm- PIH-6- 3/8” x 7” Hex Bolt- PIH-21- 3/8” Bolt Cup- PFB-33- Left Corner Post- PIH-16- 3/8” USS Flatwasher- PIH-12- 3/8” Split Lockwasher- PFB-34- Right Corner Post- PIH-3- 3/8” Hex Nut- PIH-1- 3/8”...
  • Page 36 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-31- Swingbeam Top Joist- (1) PIH-6- 3/8” x 7” Hex Bolt- PIH-21- 3/8” Bolt Cup- PFB-28- Mainbeam- PIH-16- 3/8” USS Flatwasher- PIH-12- 3/8” Split Lockwasher- PFB-34- Right Corner Post- PIH-3- 3/8” Hex Nut- PIH-1- 3/8”...
  • Page 37 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED Swingbeam Side Wall- PIH-8- 1/4” x 3” Hex Lag Screw- Trapeze Side Wall- PIH-15- 1/4” USS Flatwasher- PFB-18- 4- Hole Facia- PIH-2- 2” Coated Deck Screw- (44) PFB-10- End Deck Board- PFB-Deck &...
  • Page 38 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-19- 6- Hole Deck Facia- PIH-8- 1/4” x 3” Hex Lag Screw- PFB-21- Gusset- PIH-15- 1/4” USS Flatwasher- (16) PIH-7- 1/4” x 2” USS Flatwasher- PIH-9- 1/4” x 4 1/2” Hex Lag Screw- Pg.
  • Page 39 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-21- Gusset- PIH-7- 1/4” x 2” Hex Lag Screw- PFB-7- Deck Support- PIH-15- 1/4” USS Flatwasher- (12) PIH-9- 1/4” x 4 1/2” Hex Lag Screw- PIH-18- #14 x 1” Pan Phillips T/S- PIH-19- 1 1/2”...
  • Page 40 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-6- Corner Facia- PIH-15- 1/4” USS Flatwasher- (10) PFB-17- 6- Hole Facia- PIH-8- 1/4” x 3” Hex Lag Screw- (10) Pg. 6...
  • Page 41 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-27- Tarp Center Post- PIH-14- 1/4” 4- Prong T-Nut- PFWR-7- Wood Roof Center Post- PIH-15- 1/4” USS Flatwasher- PIH-17- 1/4” x 2” Hex Bolt- For Tarp Roof Install Only For Wood Roof Install Only Pg.
  • Page 42 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PIA-4- Small 90 Degree Bracket- PIH-15- 1/4” USS Flatwasher- PFB-1- Small Corner Facia- PIH-18- #14 x 1” Pan Phillips T/S- PIH-8- 1/4” x 3” Hex Lag Screw- Installation Same for Wood Roof & Tarp From Here Pg.
  • Page 43 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-4- Spindle- PIH-19- 1 1/2” Coated Deck Screw- PIA-4- Small 90 Degree Bracket- PIH-18- #14 x 1” Pan Phillips T/S- PIH-15- 1/4” USS Flatwasher- Pg. 9...
  • Page 44 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-3- Tic Tac Toe Board- PIH-19- 1 1/2” Coated Deck Screw- PIA-15- Tic Tac Toe- Center Tic Tac Toe Assembly between Corner Posts Pg. 10...
  • Page 45 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-4- Spindle- (12) PIH-19- 1 1/2” Coated Deck Screw- (48) Spindles Are 2 1/2” Apart Spindles Are 2 1/2” Apart Pg. 11...
  • Page 46 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-24- Right Ladder Leg- SLH-3- 3/8” 4- Prong T-Nut- PFB-25- Left Ladder Leg- SLH-5- 3/8” USS Flatwasher- PFB-20- Ladder Step- SLH-2- 3/8” x 1 1/2” Hex Bolt- PIA-5- 90 Degree Ladder/ Rockwall Bracket- SLH-1- 2 1/2”...
  • Page 47 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-22- Ladder Facia- SLH-1- 2 1/2” Coated Deck Screw- Ladder Assembly- SLH-4- 1/4” USS Flatwasher- SLH-6- #14 x 1” Pan Phillips T/S- Pg. 13...
  • Page 48 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-13- 1-Rock Rockwall Board- RWH-3- 1/4” x 1 1/4” Pan Phillips M/S- (24) PFB-14- 2- Rock Rockwall Board- RWH-6- 1/4” USS Flatwasher- (24) PFB-26- Rockwall Ladder Leg- RWH-4- 1/4” 4- Prong T-Nut- (24) PIA-5- 90 Degree Ladder/ Rockwall Bracket- RWH-5- 3/8”...
  • Page 49 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-12- Blank Rockwall Board- RWH-1- 2 1/2” Coated Deck Screw- (48) PFB-15- Rockwall Board w/ Rope Hole- RWH-6- 1/4” USS Flatwasher- 2- Rock Rockwall Board- RWH-7-#14 x 1” Pan Phillips T/S- 1- Rock Rockwall Board- Rockwall Leg Assemblies- Rockwall Boards Overhang Each Leg By 1”...
  • Page 50 Parrot Island Fort- PicnicTable/ Lower Floor Assemblies PARTS NEEDED HARDWARE NEEDED PFB-2- Picnic Seat Support- PIC-4- 1 1/2” Coated Deck Screw- (22) PFB-11- Deck & Picnic Board- PFB-10- End Deck Board- PFB-5- Picnic Table Support- Make 2 Of These Assemblies Pg.
  • Page 51 Parrot Island Fort- PicnicTable (Skip This Step If You Have Playhouse Panels And Go To PG.19) PARTS NEEDED HARDWARE NEEDED PFB-23- Picnic/ Lower Floor Mainbeam- PIC-3- 1/4” USS Flatwasher- Seat Assembly- PIC-2- 1/4” x 3” Hex Lag Screw- PIC-1- 2 1/2” Coated Deck Screw- (24) There is 13 5/8”...
  • Page 52 Parrot Island Fort- PicnicTable (Skip This Step If You Have Playhouse Panels) PARTS NEEDED HARDWARE NEEDED PFB-23- Picnic/ Lower Floor Mainbeam- PIC-3- 1/4” USS Flatwasher- Table Assembly- PIC-2- 1/4” x 3” Hex Lag Screw- PIC-1- 2 1/2” Coated Deck Screw- (20) PFB-23 is 20 1/4”...
  • Page 53 Parrot Island Fort- Lower Floor Assembly (For Playhouse Panels) PARTS NEEDED HARDWARE NEEDED PFB-23- Picnic/ Lower Floor Mainbeam- PIC-3- 1/4” USS Flatwasher- Seat Assembly- PIC-2- 1/4” x 3” Hex Lag Screw- Table Assembly- PIC-1- 2 1/2” Coated Deck Screw- (44) PFB-23 is 1”...

  • Page 54: Parts Needed

    Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-29- Rope Block- PIH-5- 3/8” x 5” Hex Bolt- PIH-21- 3/8” Bolt Cup- PIA-1- Ductile Iron Swing Hanger- PIH-16- 3/8” USS Flatwasher- PIH-12- 3/8” Split Lockwasher- PIH-11- 3/8” Nylon Insert Locknut- PIH-1- 3/8”...
  • Page 55 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PFB-29- Trapeze Gusset- PIH-16- 3/8” USS Flatwasher- PIA-11- 12” Ship’s Wheel- PIH-10- 3/8” x 3 1/2” Hex Lag Screw- Pg. 21...
  • Page 56 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PIA-12- Telescope- SLH-6- #14 x 1” Pan Phillips T/S- PIA-3- 1” Playgrip U-Mount Ladder Handles- SLH-4- 1/4” USS Flatwasher- Pg. 22...
  • Page 57 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED PIA-2- 1” Playgrip Safety Handles- PIH-15- 1/4” USS Flatwasher- PIA-14- 14’ Yellow Rope- PIH-18- #14 x 1” Pan Phillips T/S- Slip one end of the PIA-14 through the Rope Block and tie a knot. Then tie a knot every 2 to 3 feet and slip the rope through the Rockwall and tie a knot.
  • Page 58 Parrot Island Fort- Base Install PARTS NEEDED HARDWARE NEEDED Slide- SH-1- #14 x 1” Pan Phillips M/S- PIA-8 10 x 100mm Spring Clips- SH-2- 1/4” USS Flatwasher- PIA-13- 16” Trapeze Bar w/ Rings- SH-3- 1/4” 4- Prong T-Nut- Using a 5/16” Drill Bit, Drill through the Slide and Deck and Assemble Pg.
  • Page 59 Parrot Island Fort- Tarp Install (For Wood Roof Skip) PARTS NEEDED HARDWARE NEEDED PFB-9- End Tarp Board- TH-2- 1/4” x 4 1/2” Hex Lag Screw- PFB-8- Center Tarp Board- TH-3- 1/4” USS Flatwasher- TH-1- 2 1/2” Coated Deck Screw- Pg. 25...
  • Page 60 Parrot Island Fort- Tarp Install (For Wood Roof Skip) PARTS NEEDED HARDWARE NEEDED Stretch the tarp over the Tarp Boards and Mark the locations of the Snaps. Screw the TH-4’s into the indentions on both sides. Place the tarp on the snaps.
  • Page 61 Parrot Island Fort- Wood Roof Install PARTS NEEDED HARDWARE NEEDED PFWR-1- Fan Board- PFWR-2- Center Fan Board- WRH-6- 1 1/2” Coated Deck Screw- (32) PFWR-3- Bottom fan Board- PFWR-6- Center Fan Facia- WRH-4- 3/8” x 4 1/2” Hex Bolt- PFWR-8- Wood Roof Support- WRH-7- 3/8”...
  • Page 62 Parrot Island Fort- Wood Roof Install PARTS NEEDED HARDWARE NEEDED PFWR-5- Peak Facia- WRH-3- 2” Coated Deck Screw- Fan Assembly- WRH-6- 1 1/2” Coated Deck Screw- (20) Pg. 28...
  • Page 63 Parrot Island Fort- Wood Roof Install (Repeat for both side of Wood Roof) PARTS NEEDED HARDWARE NEEDED PFWR-9- Wood Roof Board- (20) WRH-2- 1 1/4” Coated Deck Screw- (22) PFWR-4- Wood Roof Support- WRH-6- 1 1/2” Coated Deck Screw- (88) PFWR-10- End Wood Roof Board- Pg.
  • Page 64 Parrot Island Fort- Playhouse Panel Install PARTS NEEDED HARDWARE NEEDED PFPP-3- Door Side Facia- PLH-1- 1 1/2” Coated Deck Screw- (24) PFPP-5- Panel Board #2- PLH-2- 1/4” x 2” Hex Bolt- PFPP-3- Door Side Facia- PLH-4- 1/4” 4-Prong T-Nut- PFPP-14- Center Panel Support- PLH-5- 1/4”...
  • Page 65 Parrot Island Fort- Playhouse Panel Install PARTS NEEDED HARDWARE NEEDED PFPP-4- Panel Board #1- PFPP-5- Panel Board #2- (10) PLH-1- 1 1/2” Coated Deck Screw- (136) PFPP-6- Panel Facia- PFPP-9- Panel Board #3- (12) PFPP-7- Store Side Panel Facia- PFPP-10- Panel Board #4- Make 2 of these Assemblies-Swingbeam &...
  • Page 66 Parrot Island Fort- Playhouse Panel Install (Remove All Gussets First) PARTS NEEDED HARDWARE NEEDED PFPP-8- Upper Swingbeam Side Facia- PLH-5- 1/4” USS Flatwasher- PFPP-11- Panel Arch- PLH-3- 1/4” x 3” Hex Lag Screw- Pg. 32...
  • Page 67 Parrot Island Fort- Playhouse Panel Install PARTS NEEDED HARDWARE NEEDED Swingbeam/ Rockwall Side Panel- PLH-5- 1/4” USS Flatwasher- PFPP-11- Panel Arch- PLH-1- 1 1/2” Coated Deck Screw- (10) PLH-3- 1/4” x 3” Hex Lag Screw- Pg. 33...
  • Page 68 Parrot Island Fort- Playhouse Panel Install PARTS NEEDED HARDWARE NEEDED Swingbeam/ Rockwall Side Panel- PLH-5- 1/4” USS Flatwasher- PFPP-12- Store Side Arch- PLH-3- 1/4” x 3” Hex Lag Screw- PLH-1- 1 1/2” Coated Deck Screw- (10) Pg. 34...
  • Page 69 Parrot Island Fort- Playhouse Panel Install PARTS NEEDED HARDWARE NEEDED Store Side Panel- PLH-5- 1/4” USS Flatwasher- PFPP-13- Door Side Arches- PLH-3- 1/4” x 3” Hex Lag Screw- PLH-1- 1 1/2” Coated Deck Screw- Pg. 35...
  • Page 70 Parrot Island Fort- Playhouse Panel Install PARTS NEEDED HARDWARE NEEDED Door Panel- PLH-5- 1/4” USS Flatwasher- PLH-3- 1/4” x 3” Hex Lag Screw- PLH-1- 1 1/2” Coated Deck Screw- PLH-7- #14 x 1” Pan Phillips T/S- PLH-6- 2” Coated Deck Screw- After Lagging In the Door Side Panel Pg.
  • Page 71 Parrot Island Fort- Playhouse Panel Install Parrot Island Fort- Treehouse Panel Install PARTS NEEDED HARDWARE NEEDED PFPP-1- Left Window Shutter- PLH-1- 1 1/2” Coated Deck Screw- (48) PFPP-2- Right Window Shutter- TPH-3- 1 1/2” Coated Deck Screw- (16) PFPP-15- Store Board- PFTP-12- Right Upper Board- Screw the Shutters on from the Inside Repeat for Both Sides of the Unit...
  • Page 72 Parrot Island Fort- Treehouse Panel PARTS NEEDED HARDWARE NEEDED PFTP-15- Right Upper Board- TPH-3- 1 1/2” Coated Deck Screw- (32) PFTP-5- Right Angle Board- Repeat for Both Sides of Unit Repeat for Both Sides of Unit Pg. 38...
  • Page 73 Parrot Island Fort- Treehouse Panel PARTS NEEDED HARDWARE NEEDED PFTP-10- Upper Back Board- TPH-3 1 1/2” Coated Deck Screw- (24) PFTP-6- Right Short Upper Board- Repeat for Both Sides of Unit Repeat for Both Sides of Unit Pg. 39...
  • Page 74 Parrot Island Fort- Treehouse Panel PARTS NEEDED HARDWARE NEEDED PFTP-16- Large Right Upper Board- TPH-3- 1 1/2” Coated Deck Screw- (20) PFTP-9- Center Board- Repeat for Both Sides of Unit Repeat for Both Sides of Unit Pg. 40...
  • Page 75 Parrot Island Fort- Treehouse Panel PARTS NEEDED HARDWARE NEEDED PFTP-1- Upper Short Board- TPH-3- 1 1/2” Coated Deck Screw- (52) PFTP-7- Window Arch- Repeat for Both Sides of Unit Repeat for Both Sides of Unit Pg. 41...
  • Page 76 Parrot Island Fort- Treehouse Panel PARTS NEEDED HARDWARE NEEDED PFTP-3- Left Window Shutter- TPH-3- 1 1/2” Coated Deck Screw- (56) PFTP-2- Right Window Shutter- PFTP-8- Spindles- PFTP-13- Upper Side Board- Repeat for Both Sides of Unit For this step we are going to add PFTP-8’s & PFTP-14’s to the existing Pick- ets, to fill in the gaps.
  • Page 77 Parrot Island Fort- Treehouse Panel PARTS NEEDED HARDWARE NEEDED PFTP-8- Spindles- TPH-3- 1 1/2” Coated Deck Screw- (24) PFTP-14- Upper Side Board- Here we do the same thing, use the PFTP-9’s to fill in what we dont have already. Pg. 43...
  • Page 78 Parrot Island Fort- Treehouse Panel (Repeat for Both Sides of Fort) PARTS NEEDED HARDWARE NEEDED PFTP-4- Upper Small Side Board- (12) TPH-3- 1 1/2” Coated Deck Screw- (48) PFTP-11- Upper Arch Facia- TPH-1- 1/4” x 4 1/2” Hex Lag Screw- TPH-2- 1/4”...

  • Page 79: Parts Needed

    Parrot Island Fort- Swingbeam Install PARTS NEEDED HARDWARE NEEDED PSB-7- 3 Position Swingbeam- SBH-8- 3/8” x 7” Hex Bolt- SBH-20- 3/8” Bolt Cup- PSB-1- Center A-Frame Block- SBH-14- 3/8” USS Flatwasher- SBH-12- 3/8” Split Lockwasher- PSB-2- A-Frame Block- SBH-11- 3/8” Nylon Insert Locknut- SBH-1- 3/8”...
  • Page 80 Parrot Island Fort- Swingbeam Install PARTS NEEDED HARDWARE NEEDED PSB-5- A-Frame Leg- SBH-19- 1/2” x 12” Hex Bolt- SBH-15- 1/2” USS Flatwasher- Beam Assembly- SBH-13- 1/2” Split Lockwasher- SBH-7- 1/2” Hex Nut- PIA-7- Swingbeam 45 Bracket- SBH-2- 1/2” Acorn Nut Plated- SBH-17- 3/8”...
  • Page 81 Parrot Island Fort- Swingbeam Install PARTS NEEDED HARDWARE NEEDED PIA-6- Swingbeam Plate- SBH-4- 1/2” x 7” Carriage Bolt- SBH-16- 3/4” USS Flatwasher- SBH-15- 1/2” USS Flatwasher- SBH-13- 1/2” Split Lockwasher- SBH-7- 1/2” Hex Nut- SBH-2- 1/2” Hex Nut- SBH-3- 1/2” x 3 1/2” Carriage Bolt- Pg.
  • Page 82 Parrot Island Fort- Swingbeam Install PARTS NEEDED HARDWARE NEEDED PSB-4- A-Frame Crossmember- SBH-4- 1/2” x 7” Carriage Bolt- SBH-9- 1/2” x 9” Carriage Bolt- SBH-16- 3/4” USS Flatwasher- SBH-15- 1/2” USS Flatwasher- SBH-13- 1/2” Split Lockwasher- SBH-7- 1/2” Split Lockwasher- SBH-7- 1/2”...
  • Page 83 Parrot Island Fort- Swingbeam Install PARTS NEEDED HARDWARE NEEDED PIA-8- 10 x 100mm Spring Clips- SBH-10- 3/8” x 5” Hex Lag Screw- BAB-2- 66” Chained Belt Swings- SBH-14- 3/8” USS Flatwasher- Pg. 49...