Table 2-7: Nominal Traits - Gpib Interface, Output Ports, And Power Fuse; Table 2-8: Nominal Traits - Data Handling And Reliability - Tektronix TDS 500D Technical Reference

Nominal Traits
Table 2–6: Nominal traits — Display system (cont.)
Name
Waveform Display Graticule
Waveform Display Levels/Colors
Table 2–7: Nominal traits — GPIB interface, output ports, and power fuse
Name
Interface, GPIB
Interface, RS-232
Interface, Centronics
Interface, Video
Logic Polarity for Main- and Delayed-
Trigger Outputs
Fuse Rating
Fuse Rating TDS694C
1
Each fuse type requires its own fuse cap.
Table 2–8: Nominal traits — Data handling and reliability
Name
Time, Data-Retention,
1, 2
Nonvolatile Memory
Floppy disk drive
Internal hard disk drive
(Option HD included in Option 2M)
External data storage
1
The times that reference waveforms, stored setups, and calibration constants are retained.
2
Data is maintained by small lithium-thionyl-chloride batteries internal to the memory ICs. At the time of manufacture, no
special disposal requirements were in effect for these batteries as the amount of hazardous material contained was below
the regulated threshold. Consult your local waste disposal agency for proper disposal.
2–16
TDS 500D, TDS 600C, TDS 700D & TDS 714L Performance Verification and Specifications
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
Single Graticule: 401 × 501 pixels, 8 × 10 divisions, where divisions are 1 cm by 1 cm
TDS 520D, 540D, 580D, and 680C:
Sixteen levels in infinite-persistence or variable persistence display
TDS 654C, 684C, 694C, 714L, 724D, 754D, 784D, and 794D:
Sixteen colors in infinite-persistence or variable persistence display
Description
GPIB interface complies with IEEE Std 488-1987
RS-232 interface complies with EIA/TIA 574 (talk only)
Optional on the TDS 520D, 540D, 580D, and 680C
Centronics interface complies with Centronics interface standard
C332-44 Feb 1977, REV A
Optional on the TDS 520D, 540D, 580D, and 680C
VGA video output with levels that comply with EIA RS 343A standard. DB-15 connector
Negative TRUE. High to low transition indicates the trigger occurred.
may be used: a 0.25I × 1.25I (UL 198.6, 3AG): 6 A FAST, 250 V
1
Either of two fuses
or a 5 mm × 20 mm (IEC 127): 5 A (T), 250 V.
may be used: a 0.25I × 1.25I (UL 198.6, 3AG): 8 A FAST, 250 V
1
Either of two fuses
or a 5 mm × 20 mm (IEC 127): 6.3 A (T), 250 V.
Description
Battery life ≥ 5 years
3.5 inch, 720 K or 1.44 Mbyte, DOS 3.3-or-later compatible
2.1 Gbyte capacity
Iomega Zip drive compatible