Configuring For Windows 10 - Antelope Zen Go Synergy Core User Manual

SETTING UP
After online activation is complete, please update the Zen Go Synergy Core to the latest
software and firmware versions available. To do this, simply open Antelope Launcher and click
the 'Update' button below the 'Bundle Version' drop-down menu.
After the update is complete, you can proceed with the instructions for your operating
system.

Configuring for Windows 10

Windows 10 needs a few tweaks to get the Zen Go Synergy Core up and running:
1. Enter the 'Sounds' options window from the Control Panel; or right-click the speaker icon in
the system tray and choose 'Open Sound settings'.
2. Make sure the Zen Tour Synergy Core is chosen under 'Output' and 'Input'.
● Under 'Output', the interface should be listed as 'ZenGo SC USB Audio Driver Playback
1/2'.
● Under 'Input', the device should be listed as 'ZenGo SC USB Audio Driver Recording
1/2'.
3. Click 'Device Properties' under 'Output'. Then, click 'Additional Device Properties'.
4. Enter the 'Supported Formats' tab and place checkmarks next to all the available sample
rates.
Antelope Audio Zen Go Synergy Core User Manual
Page 10