Antelope Zen Go Synergy Core User Manual page 28

- Charge device A from B - lets you connect to mobile devices, such as
smartphones and tablets, while supplying USB power to both interface and mobile
device.
The Zen Go Synergy Core is class-compliant with modern mobile devices and
readily connects to them for use with playback and recording apps. Connect a USB
power source with at least 1A of electric current to the dedicated Power USB-C
port on the interface. Connect your mobile device to the other USB-C port. Choose
'Charge device A from B' in the menu, and you are good to go.
● Factory Reset - press the rotary control to restore the unit to its factory default
settings.
Press the 'Antelope button' to exit the Control Menu.
'Antelope button' - the 'Antelope button' features the following functionality:
● When inside a menu, press the button to exit the menu.
● Press and hold the button to enter display brightness adjustment.
3. Rotary Control
Large stepped encoder for precise adjustment of gain, volume, and other values. Also used for
menu navigation.
● When not inside a menu, turn the encoder to adjust Monitor output volume.
● When not inside a menu, press the encoder to mute or un-mute the Monitor outputs.
Antelope Audio Zen Go Synergy Core User Manual
Page 27