Loopback Function For Streaming; Edge & Verge Mic Emulations - Antelope Zen Go Synergy Core User Manual

Loopback function for streaming

This chapter explains how to configure the Zen Go Synergy Core for use with a streaming
application. The basic workflow is like this:
1. Use the Control Panel application to create the audio mix you want to send to your
streaming application. This mix can be the 'Monitor/HP1' mix, the 'Headphone 2' mix, or both.
The mixes can include both input audio (such as audio from a microphone) and operating
system/computer audio (playback, DAW output, sound effects, and so on).
2. Head to the 'DAW I/O' view in the Control Panel application. Use the Input Selectors to
route 'MON/HP1 MIX' 1 - 2 and/or 'HP2 MIX' 1 - 2 to the virtual inputs of your choice. For
example, route 'MON/HP1 MIX' 1 to 'Record 5', and 'MON/HP1 MIX' 2 to 'Record 6'.
3. Configure your streaming application to receive audio from Inputs 5 and 6. This way, the
application will receive the stereo output from the Monitor/HP1 mixer in the Control Panel
application.
Edge & Verge mic emulations
The Zen Go Synergy Core features integrated real-time microphone emulations. It is possible
to monitor and record with mic emulations on. It is also possible to record 'dry' audio and mic
emulation audio on separate tracks for more production flexibility.
Note that the Edge & Verge mic emulations are intended for use with the Antelope Audio
Edge & Verge modeling microphones only. We cannot guarantee optimal (or even usable)
results with other microphones, modeling or not.
The Edge Quadro microphone is not compatible with the Zen Go Synergy Core because it
requires four microphone inputs. The interface has two. Hence, instructions for it are excluded
from this manual.
Getting Started
Connect your headphones to input HP1 on the front panel. Connect your Antelope Audio Edge
or Verge modeling microphone to inputs A1 and/or A2 on the rear panel. In our example, we
are using the Edge Solo, which is connected to input A1.
Antelope Audio Zen Go Synergy Core User Manual
Page 58