Antelope Zen Go Synergy Core User Manual page 12

5. Enter the 'Enhancements' tab and disable all enhancements.
6. Enter the 'Advanced' tab and choose any of the available "2 channel, 24-bit" modes from
the drop-down menu. Click 'OK' to close the window.
7. Back in Sound settings, click 'Device Properties' under 'Input'. Then, click 'Additional Device
Properties'. Enter the 'Enhancements' tab and disable all enhancements. Click 'OK' to close
the window.
Tips
If you are experiencing interruptions or failure when using your DAW and trying to
●
playback audio from your OS at the same time, make sure that the device sample rate
matches the one of your DAW session.
In some cases, disabling the 'Exclusive mode' functionality from the 'Advanced' tabs
●
might help when running multiple playback applications at the same time.
● Disabling the 32kHz sample rate isn't mandatory, but it might help in general.
Antelope Audio Zen Go Synergy Core User Manual
Page 11