Monitors & Headphones View - Antelope Zen Go Synergy Core User Manual

Control Panel Views
The three Control Panel views - 'Monitors & Headphones', 'Digital Outs', and 'DAW' - contain
input selectors, Synergy Core FX chains, mixer controls, volume controls, and peak meters for
the Zen Go Synergy Core's analog and digital audio outputs. The majority of your Control
Panel application activity is going to happen here. Please read this sub-chapter thoroughly.
Monitors & Headphones view
The 'Monitors & Headphones' view contains two separate 15-channel virtual mixers. One is
routed to the Zen Go Synergy Core's Monitor and Headphone 1 (HP1) outputs and is accessed
from the 'Monitor/HP1' tab on the left. The other is routed to the secondary headphone output
(HP2) and is accessed from the 'Headphones 2' tab on the lower left.
Note that the two mixers share their audio inputs and applied Synergy Core FX, but the pan
controls, volume faders, and Solo/Mute/Link controls are individual for each.
Antelope Audio Zen Go Synergy Core User Manual
Page 46