Configuring For Windows 10 - Antelope Zen Tour Synergy Core User Manual

6. Register your device with the 'Antelope Audio Registration Wizard' by following the on-screen
instructions.
7. Connect your analog and digital equipment of choice to the Zen Tour Synergy Core.
8. Launch your preferred DAW and:
Choose the Zen Tour Synergy Core as your main input and output device.
●
Make sure your DAW and operating system sample rates match the device sample rate.
●
Need any help?
Visit the Antelope Audio

Configuring for Windows 10

Windows 10 needs a few tweaks to get everything up and running:
1. Enter the 'Sounds' options window from the Control Panel or right-click the speaker icon in the
system tray and choose 'Open Sound settings'.
2. Make sure the Zen Tour Synergy Core is chosen under 'Output' and 'Input'.
Next, click 'Device Properties' under 'Output'. Then, click 'Additional Device Properties'.
3. Enter the 'Supported Formats' tab and place checkmarks next to all the available sample rates.
Zen Tour Synergy Core User Manual
Customer Support page, choose your device and go from there.
7