Antelope Zen Go Synergy Core User Manual page 77

● Power supply cable should be routed so that it is not likely to be walked on or
squeezed by items placed upon or against it.
● To completely turn off the device, unplug the power cable first from the outlet and
then from the rear panel of the unit.
● Both occasional and continued exposure to high sound pressure levels can cause
permanent ear damage via headphones and monitors.
● The device is designed to operate in a temperate environment, with a correct
Operating Temperature of 0-50° C, 32-122° F.
TECHNICAL SPECIFICATIONS
ANALOG
Analog Inputs
2 × Mic / Line Inputs / Hi-Z Inputs
48V phantom power and independent preamp gain for each input
Analog Outputs
1 × Primary Monitor Out on TRS 1/4 Jacks, +20 dBu max, signal balanced, DC-coupled
1 × Secondary Monitor Out on RCA mirrored from the primary out
2 × Stereo Headphone Outputs
Mic Preamp
EIN: -128 dBu (A-weighted)
Dynamic Range: -121 dB (A-weighted)
THD: -106 dB
Antelope Audio Zen Go Synergy Core User Manual
Page 76