Antelope Zen Go Synergy Core User Manual page 45

48V Button
Click to activate 48V phantom power for condenser microphones. Click again to de-activate.
As a general precaution, make sure to deactivate 48V phantom power before connecting
dynamic and ribbon microphones.
The 48v phantom power button is protected with a tooltip. Press Ctrl + Left Click to enable
phantom power on the selected mic preamp.
Phase flip button
Click to reverse (flip) the input signal's phase. Click again to return to normal. It's good
practice to check how your input signal sounds with and without phase flip before recording.
Mic emulations button
Shown in 'Mic' mode. Click to open the Edge & Verge mic emulations window. Mic emulations
are explained in the 'Edge & Verge Mic Emulations' chapter.
Text label
Antelope Audio Zen Go Synergy Core User Manual
Page 44