GALLERY Classic Eco Installation Instructions Manual page 26

DETAILED USER INSTRUCTIONS
SETTING THE REMOTE CONTROL HANDSET
Upon successful insertion of the batteries in the handset the
display will be as shown in Fig. 5.
The handset will be supplied paired to the fire and all that
is required is to set the time of day and select if a 24h hour
clock or 12 hour clock display is required and if temperature
display is on Celsius or Fahrenheit.
SETTING THE TIME AND DATE
Holding the handset as described previously to unlock the
keypad, press and hold "SET" for a few seconds and the
display will be as shown in Fig. 6.
Set the display for 12 or 24 hour display - as always when
pressing the remote control buttons keep the control held to
keep the green light on and therefore handset safety feature
unlocked. The H indicates that it is time to set the timer to
either 24 hour display or 12 Hour (AM or PM) display. Press
the + or – button on the handset to toggle between the two
settings. When you are ready to confirm the setting you
want press the "SET" button to progress to setting the day
of the week.
Setting the day of the week - Press and release the + and –
buttons until the correct day of the week is shown on the
display.
Press "SET" to accept the day of the week and to
progress to setting the Hour of the day. Note: Whilst
doing this setup pressing "SET" advances to the next
display and pressing "MODE" will return you to the
previous display setting.
Setting the hour - press and release the + or – button
to change the hour to the correct hour and press set
to store and to move to setting the minute. Repeat
this for setting the minutes.
26
Mo = Monday
Tu = Tuesday
We - Wednesday
Th = Thursday
Fr = Friday
Sa = Saturday
Su = Sunday
Fig.5
Fig.6