Wavelength Repeatability - Jasco V-530 Hardware/Function Manual

4.3.2 Wavelength Repeatability

To check wavelength repeatability, measure the spectrum of the Deuterium (D
lamp with an emission line at 656.1 nm three times repeatedly.
(1) Light the D lamp as follows.
2
a) Start [Environment]
[Environment] dialog box appears.
b) Select [Hardware Setting] and then click the <Execute...> button. The
following dialog box appears.
c) Check the [Deuterium] box and uncheck the [Halogen] box.
d) Click <OK> to close the dialog box. Only the D
(2) Start [Spectrum Measurement] from the [Spectra Manager] window and set
the following parameters.
V-530 Measurement parameters
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
from the
Fig. 4.2 [Environment] dialog box
Fig. 4.3 [Hardware Setting] dialog box
V-550/560/570
21
[Spectra Manager]
lamp is lit.
2
)
2
window. The
measurement