3.2.2 Rear Panel
Warning label
"AC Inlet"
Component
Function
AC Inlet
Accepts the power input cable.
GND
Ground terminal
Fuse
Fuses for the main unit (two time-lag fuses)
iRM PS
Accepts the remote module power cable.
Serial A
Connector for connecting the communication cable to DS or
iRM
Serial B
Connector for connecting the RS-232C cable.
Recorder
Terminal for analog output.
The value specified by setting the ordinate is recorded in the
range 0 to 1 V.
AUX
Auxiliary connector for connecting an accessory, such as a
quick flow sampler.
Warning label
Warning labels for fuse and ground (see page ii).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
"GND"
"Fuse"
Fig. 3.4 V-550/560/570 Rear panel
15
"iRM PS"
"Recorder"
"Serial A"
"Serial B"
"Aux"