Table of Contents
Advertisement
Note: The test number ranges from 200001 to 299999.
Press
to exit without running a QC Test.
Press
aft er making sure the strip being used is the same as that shown on the
screen. A test screen will be shown as seen below.
Cauti on: Use only Reacti f Urinalysis Reagent Strips for proper functi oning and accurate
results. If it is the fi rst ti me running the QC Test, please refer to Secti on 7
Analyzer Setup: Test Setti ngs.
Press
to cancel the test. If canceled, when the QC Lockout is enabled, the analyzer
will change the test mode to STAT. An "E" will be displayed aft er the test number on all
printouts to show QC Tests were out of date and pending. If the QC Lockout is disabled,
the analyzer will have no response.
Reacti f Touch
54
nal von minden GmbH · Manual
Advertisement
Table of Contents
