nal von minden Reactif Touch Manual page 45

User Lockout
Press the User Lockout opti on, to confi gure User Lockout features.
User Lockout Disabled (User Lockout OFF)
For initi al use, the User Lockout functi on is disabled. In this case, the Operator Setup is
available to be set, while the Administrator Setup opti on is not available to be set.
When the User Lockout is disabled, all users are allowed to perform testi ng and modify
all the setti ngs.
User Lockout Enabled (User Lockout ON)
Change the User Lockout setup to ON. In this case, the Administrator Setup is available
to be set, while the Operator Setup opti on is not available. User Logout will be enabled
and Operator Setup will be enabled aft er setti ng the Administrator informati on.
When the User Lockout is enabled, only the Administrator is allowed to modify all
the setti ngs. Other operators are only allowed to perform testi ng and modify certain
setti ngs, such as Conti nuous test, test mode, etc. Operators gain access by entering their
ID. And a User Login screen will be shown before the initi al screen when the analyzer is
turned on.
41