nal von minden Reactif Touch Manual page 48

User Logout is enabled and Operator Setup will be enabled aft er Administrator informa-
ti on had been set. The Operator Setup process is similar to User Lockout Disabled.
Timed Logout
Select Timed Logout in the Lockout screen and press the Drop-Down Arrow to turn the
setti ng ON or OFF. For the initi al use, the Timed Logout functi on is OFF.
• Timed Logout - OFF
For the initi al use, the Timed Logout functi on is OFF. In this setti ng, the analyzer will
remain powered on all the ti me, even if the screen has not been touched for a long
ti me. The user who is currently logged in will remain logged in. If a new user wants
to operate the analyzer, they will need to manually log the previous operator out and
login with their own name and password.
• Timed Logout - ON
Select ON and set the waiti ng ti me (select from between 1 minute to 100 hours). This
turns on the analyzer's power saving mode. In this setti ng, if the screen is not touched
during the waiti ng ti me, the Test Table Insert will be drawn back into the analyzer, the
screen will darken, and the user account will logout. When a user wakes the analyzer
Reacti f Touch
44
nal von minden GmbH · Manual