nal von minden Reactif Touch Manual page 24

If the analyzer has been enabled to automati cally print the results, the Printi ng screen
will be displayed unti l the print out has been completed. The date, ti me, and test
sequence number will be printed along with the test results. If the analyzer has not
been enabled to automati cally print the test results, Press
printed. (For further instructi ons on how to print results automati cally, refer to Secti on 7
Analyzer Setup: Analyzer Confi gurati ons: Printer Setup).
Press to complete the test and return to the Test Preparati on screen.
If the analyzer has been set up to fl ag a confi rmatory test for one or more parameters
(refer to Secti on 7 Analyzer Setup: Test Setti ngs: Abnormal Setti ngs: Flags for Confi rma-
ti on Test), press
the result meets the Abnormal setti ng value. (Refer to Secti on 7 Analyzer Setup: Test
Setti ngs: Abnormal Setti ngs).
If desired, the results may be changed.
Press to enter a confi rmatory screen, as shown below.
Reacti f Touch
20
nal von minden GmbH · Manual
on the Results screen, the Edit Result screen is displayed when
to have the results