nal von minden Reactif Touch Manual page 35

Test Number
Select the Test Number opti on to be able to input a new test number. Enter the new Test
Number. Press
existi ng number.
The fi rst digit in the number depends on the Test Mode. The fi rst digit will be 0 for
Routi ne, 1 for STAT, or 2 for QC Test. This fi rst digit is fi xed and cannot be changed. The
test number of the next run will be set sequenti ally from the inputt ed number. The Test
Number for a QC Test can't be changed.
Note: Specimens may be assigned the same test number, while the specimens with the
same test number can be disti nguished by test date and ti me in the Database.
Type of Strip
Select Type of Strip to change the strip type. Each strip type name defi nes the number of
test parameters. Refer to Appendix 2 for a detailed list of available parameters.
Strip Lot
Select Strip Lot opti on to be able to input a new number. Enter the new strip lot used. Press
to confi rm. Press
Strip Expirati on Date
Select the Strip Expire Date opti on then move the cursor to the year and reset the expirati on
year using . Move the cursor to the Month and reset the expirati on month using
Units
There are fi ve unit opti ons. Select Units and press the Drop-Down Arrow to change the
setti ngs to Conventi onal+ Arbitrary, SI+ Arbitrary, Arbitrary, SI, or Conventi onal.
Tests to Report and Display
Select Tests to Report and Display to change the parameter for displaying and reporti ng.
Choose the parameter and press the
to keep the changes and return to the Test Setti ngs screen. Press
changes and return to the previous screen
to confi rm. Press
to delete any changes and keep the existi ng number.
or
to delete any changes and keep the
to reset its order. Press
.
to cancel the
31