nal von minden Reactif Touch Manual page 42

Power Save - ON
Select ON and set the waiti ng ti me. This turns on the analyzer's power saving mode. In this
setti ng, if the screen is not touched during the waiti ng ti me, the Test Table Insert will be
drawn back into the analyzer and the screen will darken. The default ti me is 5 minutes.
Power Save - OFF
In this setti ng, the analyzer will remain powered on all the ti me, even if the screen has
not been touched for a long ti me.
Keypad
Select Keypad and press the Drop-Down Arrow to set the keypad to the Alphanumeric
key or Standard keyboard. If Standard keyboard is selected, please connect an external
keyboard. If Alphanumeric key is selected, a key board as following will be shown on the
touch screen when needed.
Connecti vity
Select Connecti vity to display the screen below
This screen is used to confi gure the RS232, Bluetooth, LAN, and WLAN opti ons. Choose
the connecti vity method as desired and then set the data informati on. Press the Drop-
Down Arrow to change this informati on to the appropriate opti on, as shown below.
Reacti f Touch
38
nal von minden GmbH · Manual