Beckhoff CX B110 Series Manual page 27

4. Type the host name or the IP address of the device into the Enter Host Name / IP box and press
[Enter].
5. Mark the device found and click on Add Route.
The Logon Information window appears.
6. Enter the user name and password for the CX in the User Name and Password fields and click OK.
The following information is set as standard in CX devices:
User name: Administrator Password: 1
7. If you do not wish to search for any further devices, click on Close to close the Add Route Dialog.
The new device is displayed in the Choose Target System window.
8. Mark the device that you wish to set as the target system and click on OK.
ð You have successfully searched for a device in TwinCAT and inserted the device as the target system.
The new target system is displayed in the bottom right-hand corner together with the host name and IP
address (AMS Net ID).
Using this procedure you can search for all available devices and also switch between the target systems
at any time. Next, you can append the device to the tree view in TwinCAT.
CXxxxx-B110
Parameterization and commissioning
Version: 1.3 27