Beckhoff CX B110 Series Manual page 37

7. In the tree view on the left click on PLC – Configuration, then on the PLC Settings (Target) tab.
8. Select the Start PLC under Boot Project and click on Apply.
9. Start PLC Control and open the PLC project.
10. In the menu bar at the top click on Online, and then on Choose Runtime System.
11. Select the runtime system from the CX and click on OK.
12. In the menu bar at the top click on Online, then Login.
The PLC project is logged in.
13. In the menu bar at the top click on Online, then Create Boot Project.
ð You have successfully loaded the CX configuration. From now on, TwinCAT will start in Run mode and
the PLC project will start automatically.
Next, the master can be added in a new project in the System Manager and can then be used to find
slaves that have already been set up.
CXxxxx-B110
Parameterization and commissioning
Version: 1.3 37