Changing To Three Wheeler Module - ESAB Versotrac EWT 1000 Instruction Manual

5 OPERATION
5.7

Changing to three wheeler module

1. Dismount the welding tractor according
to the instructions in chapter
"Transportation."
To prevent overturning, place a support
block under the welding tractor before
removing the front wheels.
Remove the three screws holding the
front wheels.
2. Assemble the bracket using the three
screws.
3. Slide the three wheel kit onto the
bracket.
Lock into position with the two screws.
Change back to four wheels following
these steps in reverse order.
0463 613 101 - 25 - © ESAB AB 2020