5 OPERATION
Grooved wheels (0443 682 881)
If there is no suitable edge along which to
steer the welding tractor, as when making an
I-joint, two grooved wheels can be attached
and will run on angled iron guide rails, which
can be joined together to make up the
required length.
See "ACCESSORIES" chapter.
Flat fillet welding (0904 586 880)
The flat fillet welding kit can be used to keep
the equipment straight upward when welding
a tilted fillet joint.
The angle can be set to 0°, 30°, and 45°.
See "ACCESSORIES" chapter.
0463 613 101
- 35 -
© ESAB AB 2020