ESAB Versotrac EWT 1000 Instruction Manual page 20

4 INSTALLATION
Power source connection socket XP2 pinouts
X Arc voltage from welding head
K Power source start
L 0 V, common for power source start and reference
M 0–10 V reference
N Current shunt negative (-mV)
P Current shunt positive (+mV)
R Emergency stop
Y Emergency stop
S 24 V AC/trigger input. For non-ESAB power sources.
T Contact closure to pin S/trigger common. For non-ESAB power sources.
U Reserved for future use.
To connect EAC 10 with a non-ESAB SAW analog power source, an analog power source
interface box and control cables are available as accessories.
See "ACCESSORIES" chapter.
0463 613 101 - 20 - © ESAB AB 2020