Connecting To A Digital Power Source - ESAB Versotrac EWT 1000 Instruction Manual

4 INSTALLATION
4.5.1

Connecting to a digital power source

Connect the interconnection cable to the connector marked "I".
Interconnection cables between CAN-based ESAB power sources and the EAC 10 are
available as accessories in different lengths.
ESAB CAN-based power sources are LAF xxx1, TAF xxx1, and Aristo® 1000.
For further information about connecting a welding power source, see the separate
instruction manual.
Always use the dust cover on connections where no cable is connected.
0463 613 101 - 18 - © ESAB AB 2020