Eac 10 - ESAB Versotrac EWT 1000 Instruction Manual

7 TROUBLESHOOTING
Type of fault Possible cause
Poor welding Bad or no feedback to the
result system.
LAF, TAF: No (-) feedback.
7.3

EAC 10

Type of fault Possible cause
Control unit does 42 V missing.
not start, diode
not lit
Control pendant 12 V missing.
does not start
0463 613 101
Action
Check the electrical connections. Check
cables.
Check the electrical connections. Check
cables.
Action
Check the electrical connections.
Check control cable.
Check if On/Off switch is in the right
position (analog/digital).
Check the electrical connections.
Check cable.
- 39 - © ESAB AB 2020