Initializing A Program; Canceling The Program Edits - Korg Opsix Owner's Manual

Initializing a program

You can reset all parameters to the INIT program default values.
1.
Press the /INITIALIZE button while holding down the SHIFT button.
The message "Initialize all param values?" will be displayed, and the YES and NO buttons will
blink.
2.
Press the YES button to initialize the program.
The program will be initialized, and "Program Initialized" will appear in the display.
Press the NO button to cancel.
Tip:
3.
Save your edits or the entire program as necessary.

Canceling the program edits

You can cancel all edits made to a program and revert the settings of the program to its saved state.
1.
Press the WRITE/RECALL button while holding down the SHIFT button.
"Revert current changes?" will be displayed, and the YES and NO buttons will blink.
2.
Press the YES button to cancel your edits.
The edits will be canceled, and the message "Program Recalled" will be shown in the display.
Press the NO button to cancel.
Tip:
28