Virtual Patch Source List - Korg Opsix Owner's Manual

Virtual Patch Source List

Scope
Display Full name
OFF
Off
CTRL
Controller
KBD
Keyboard
EG LFO
EG/LFO
CC +
CC Unipolar
CC −/+
CC Bipolar
MIDI
MIDI
Source
Display Full name
---
MOD WHEEL Modulation Wheel
PITCH WHEEL Pitch Wheel
PITCH WHL+ Pitch Wheel +
PITCH WHL− Pitch Wheel −
PEDAL Damper Pedal
NOTE Note Number
VEL Velocity
EXP VEL Exp. Velocity
REL VEL Release Velocity
EG1 EG1 (Pitch)
EG2 EG2 (Filter)
EG3 EG3 (Assignable)
LFO1 LFO1 (Operator)
LFO2 LFO2 (Filter)
LFO3 LFO3 (Assignable)
1..119 CC 1..119 +
1..119 CC 1..119 +/−
AFTER TOUCH After Touch
POLY AFTER Poly After Touch
Notes
This effect will be applied when the PITCH wheel is
moved in the + direction (away from you).
This effect will be applied when the PITCH wheel is
moved in the − direction (towards you).
The effect will be applied according to the note number.
The center note is 60 (C4).
The effect will be applied exponentially in relation to the
velocity. The effect will not be readily evident at lower
velocity values, but will be applied at a steep curve with
higher velocity values.
The effect will be applied according to release velocity
(how quickly you release the key after you play a note).
When the CC value is "0", the V.Patch effect will also be "0".
When the intensity is a positive value, increasing the CC
value will result in a positive effect only. (this works the
opposite with a negative value).
When the CC value is "64", the V.Patch effect will be "0".
When the intensity is a positive value, increasing the CC
value above 64 will result in a positive effect, and
reducing the value will result in a negative effect.
works the opposite with a negative value).
81
(this