Panel description and functions
1. Front panel
1
2
17
18
4
19
20 21
1. VOLUME knob
This adjusts the volume of the AUDIO OUTPUT jacks (L/MONO, R) and headphone jack.
2. TAP TEMPO button
During playback, you can enter a tempo manually by lightly tapping this button a few times at
the desired tempo (Tap Tempo).
3. RATIO OP 1–6 knobs
These knobs change the pitch of each Operator. Operate the knobs while holding down the SHIFT
button to change the Operator modes. See "Editing with the OPERATOR MIXER", p.23.
4. LEVEL OP 1–6 sliders
These sliders change the output level of each Operator. Operate the sliders while holding down
the SHIFT button to change the oscillator waveforms. See "Editing with the OPERATOR
MIXER", p.23.
5. Display
This shows various information such as program data and parameter values.
6. PROGRAM knob
Selects the program. See "Selecting a program to use when playing", p.19.
7. PAGE < and > buttons
Use the < and > buttons to switch between edit pages.
These are enabled when the page guide is shown in the
display.
3
5
7
22 23
24
25
6
9
10
8
11
26
12
12
13
Page guide
Page guide
(the second page is selected)
14 15 16
Need help?
Do you have a question about the Opsix and is the answer not in the manual?
Questions and answers