KSYNC (Key Sync)
Specifies how the LFO will be applied to a voice when note-on occurs.
Off: The LFO phase will not be reset when note-on occurs. It will only be reset when selecting a
program or starting step sequencer playback.
CMN (Common): The phase of the LFO will be reset by the first note-on that occurs from a
condition of no keys being held; it will not be reset for subsequently played voices.
VOICE: The LFO phase will be reset with each note-on, and modulation will be applied in
differing phases to each voice.
PHASE
This sets the phase when the LFO is reset. When this is set to RND, the LFO will start with a different
phase for each note-on message.
TEMPO (Tempo Sync)
On: The note length will be set using SPEED. The LFO frequency will synchronize to the system
tempo, as it is controlled by this speed.
Off: The LFO speed is controlled by the SPEED parameter, in Hz.
FADE
The LFO can fade in gradually, instead of starting immediately at full strength. This sets the time
from note-on until the LFO reaches maximum amplitude.
This will have no effect when "KSYNC" is off.
Note:
Note on
Note on
Note all off
1VOICE
2VOICE
Note on
Note on
Note on
51
Need help?
Do you have a question about the Opsix and is the answer not in the manual?
Questions and answers