Global; Tune; Midi - Korg Opsix Owner's Manual

Altered fm synthesizer

Hide thumbs Also See for Opsix:

Table of Contents

GLOBAL

This page is used to configuring the overall settings for the opsix. Use the PAGE < and > buttons or

DATA ENTRY A–D knobs to change the category. The OP −/+ buttons or the DATA ENTRY B/E

knobs change the parameter, and the DATA ENTRY C/F knobs change the value.

Master Tune

This adjusts the overall tuning for the entire opsix in one-cent units (semitone = 100 cents), over a

range of ±50 cents.

When the value is set to 0 cents, A4 is equal to 440 Hz.

Transpose

Adjusts the overall pitch of notes you play on the keyboard in semitones, over the range of one octave

up or down. These settings are applied at the position (Pre or Post) set using "ConvertPosition".

Global Channel

Specifies the MIDI channel. This MIDI channel will be used for transmitting and receiving note

messages, pitch bend and control change messages.

Table of Contents

Show Quick Links

Table of Contents