Vanraam Fun2Go User Manual page 8

Handlebars height
The height of the handlebars affects the comfort
of the ride. It determines the pressure on the
hands and the position of the back. You decide
the most comfortable position yourself with
some practice.
To adjust the handlebars:
1. Slightly loosen the screw by using an
Allen key.
2. Slide the handlebars to the correct height
and tighten the screw very firmly again.
Do not pull out the handlebars further than the mark. Otherwise
the tube will not be deep enough in the shaft and will risk
breaking off, which can lead to serious injuries.
Position handlebars
You can tilt the handlebars. This influences the
distance from the handlebars to the upper body.
Determine your own most comfortable position
by using the bike.
To tilt the handlebars:
1. Slightly loosen the screws [A] and [B]
with an Allen key.
2. Put the handlebars in the desired
position and then tighten the screws
considerably.
3. Slightly loosen screw [C] with an Allen
key, put the handlebars in the correct
(horizontal) position and then tighten
the screw again.
Version 21.01
1.
3.
[C]
[A]
1.
2.
MIN INSERT
2.
[B]
1.
8/43