Vanraam Fun2Go User Manual page 14

Check before every ride:
The brakes (including the parking brakes)
•
The tyre pressure (recommended: 3 bar)
•
The lights
•
That all parts are fitted properly
•
That the battery is adequately charged (depends on options)
•
Contact your dealer and stop using your tricycle as soon as you observe irregularities
during the check! As with all mechanical parts, the tricycle is subject to wear tear and high
loading. If a component fails, it can lead to very dangerous situations. This can lead to
damage or injuries to the user of the tricycle/. Any form of cracks, scratching or change in
colour in heavily loaded parts or a component indicates that the component must be
replaced.
The tricycle gives a very different ride experience than a bicycle.
If there is an electric motor on a bike: you must train with the
acceleration function and reverse functions. Be careful that the
acceleration mode or reverse mode are not unintentionally started
while using the bike. For example, at traffic lights the reverse function
can accidentally be activated and the tricycle reverses.
High speeds in the bends, driving on rough ground, and sharp bends can lead
to the tricycle falling over!
Important safety points for the cyclist
Be very careful during the first ride.
•
When riding the tricycle hold both hands firmly on the handlebars and feet on the
•
pedals.
Test the riding style of the tricycle on rough ground at moderate speed. This way
•
the cyclist learns how to react to unexpected movements of the tricycle and the
handlebars during use.
Small obstacles should be cycled over with appropriate speed.
•
Obstacles higher than five centimetres should be avoided.
•
Ensure that no dangerous speed develops while driving downhill and entering
•
tunnels. Brake on time and cycle at a moderate speed.
Version 21.01
14/43