Vanraam Fun2Go User Manual page 16

When the system is not used, it will automatically turn off after a certain time.
Always turn off the electric system before getting on and off the bike, and when
you are walking while holding the bike.
2. Degree of support 1, 2 and 3
The desired support can be set by using one of the support levels 1, 2 or 3.
1. Light support, maximum range.
2. Average support, average range.
3. Maximum support, low range.
You can change the level while cycling.
The behaviour of the battery depends on a lot of different factors and is strongly
influenced by: capacity and voltage of the battery, degree of support that is used,
temperature, wind speed, tyre pressure, cycling speed, weight of the user and the
luggage, use of gearing etcetera.
3. Start assist
The Silent electric motor has a start support. This allows the driver to pull-away
without pedalling up to a speed of 6 km/h over five seconds. To accelerate, press the
start assist button and keep it pressed down. The function will only activate again,
when the support button has been pressed down again.
If you peddle normally, the function works for up to five seconds, each time the button is
pressed, up to maximum speed of the bicycle (20 km/h).
The start assist is used for:
Extra support when starting.
•
Extra support for cycling uphill.
•
When cycling a steep climb, you can use support in level 3 and push the start assist
repeatedly for six seconds to achieve maximum support.
Version 21.01
16/43