Table of Contents
Advertisement
Table of Contents
Introduction
This manual describes the following Wheel Balancer models:
•
DST-64T. A computer-controlled Wheel Balancer that uses Drive-Check™ technology to simulate
driving speed conditions and measure imbalances. Includes an Outer Arm for automatically
determining Wheel Width.
•
DST642D. A computer-controlled Wheel Balancer that uses Drive-Check™ technology to
simulate driving speed conditions and measure imbalances.
More information about BendPak Ranger products is available at rangerproducts.com.
This manual is mandatory reading for all users
anyone who installs, operates, maintains, or repairs them.
⚠
DANGER
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support for your Balancer is available from your distributor or directly from BendPak Ranger:
using a web browser, visit the
then fill in and submit a Support Ticket (make sure to click the Submit button at the bottom).
DST-64T / DST642D Wheel Balancers
3
4
4
6
8
9
10
11
Be very careful when setting up, operating, maintaining, or repairing the equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
BendPak Support
of the DST-64T or DST642D, including
website, click on
3
+
New support ticket, and
P/N 5900192 - Rev. F - March 2021
24
46
47
53
54
56
78
Hide quick links:
Advertisement
Table of Contents
