REASSEMBLING THE LOWER DOOR GLASS & HINGE HANGER
RESSEMBLY METHOD OF INNER DOOR
GLASS :
1. See steps 1-2 on page 3-18)
RESSEMBLY NOTE : When you reinstall the
Insulation around the oven door glass, make sure
that the insulation is not visible in the glass after the
door is reassembled.
COMPONENT ACCESS
(For the Lower Door)
RESSEMBLY METHOD OF HINGE HANGER :
1. Cover the inner cover with door frame.
2. Screw in the 2 top liner screws.
3. Place the door liner assembly on a padded work
surface with the hinge hangers over the edge.
4. Screw in the 2 bottom liner screws.
3-20
2 top liner screws