Removing The Door Latch And Lower Door Switch - LG LDG4313BD Service Manual

REMOVING THE DOOR LATCH & LOwER DOOR SwITCH
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply and gas supply
going to the range.
2. Remove the Upper & Lower door.
(See pages 3-19, 3-20 for the procedure)
3. Remove the manifold, cooktop and the case
assembly (see page 3-5 for the procedure)
4. Remove the Side panels.
(See page 3-26 for the procedure.)
5. To remove the Lower door latch.
a) Remove 4 screws to detach 2 hinge
supporters of Upper oven
4 screws
COMPONENT ACCESS
(For the Lower oven only)
b) Remove 2 screws to widen the space between
Upper & Lower cavities. After that remove the
hinge bracket.
c) Tilt the Upper cavity cautiously, make sure that
the controller does not fall down the floor.
d) Remove 2 screws to replace the lower latch.
f) Pull out the Lower latch from the bar.
3-9
2 screws
2 screws
Unhook
Actuating
Rod