Removing The Oven Door Handle & Glass - LG LRG3060ST Service Manual

30” freestanding gas range
Hide thumbs Also See for LRG3060ST:
Table of Contents

Advertisement

REMOVING THE OVEN DOOR HANDLE & GLASS
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
1. Remove the oven door from the range (see page
3-15 for the procedure).
2. Place the oven door on a padded work surface
with the front glass facing down.
3. Remove the 4 top door screws.
4 top liner screws
4. Remove the three bottom screws from the door liner.
3 bottom liner screws
5. Lift the liner assembly off the front glass and set it aside.
COMPONENT ACCESS
3-15
6. To remove the door handle & trim
a) Remove the 2 door handle screws and lift the door
handle off door trim and slide up the door trim.
Door handle screw
Door handle screw

Advertisement

Table of Contents
loading

Table of Contents