Feature Programming - SpectraLink NetLink MOG600 Installation Manual

SpectraLink Corporation Installation
NetLink OAI Gateway
*
5.7

Feature Programming

The OAI function is accessed in the Wireless Telephone by pressing the button plus
FCN
a second button. In IP systems, the button used to access the OAI feature from the
Wireless Telephone is configured through the Feature Programming option.
!
This setting will override any other programming.
Navigate to the menu for the NetLink OAI Gateway and select
NetLink OAI System
. A screen similar to the following displays:
Feature Programming
Use the arrow keys to select the function number to associate with OAI and type any
label up to six characters. What you type here will be displayed on the Wireless
Telephone menu.
In the example screen above, the + key sequence will display on the
FCN # PhonBk
Wireless Telephone function menu. The OAI application in this case is a phone book
enabling speed dialing to those listed.
*
In NetLink Telephony Systems, the OAI key is programmed on each NetLink Gateway. See the
instructions for setting up the NetLink Gateway for specific configuration information.
Part Number: 72-0078-07-A.doc Page 26